NCCER 00101-15 Basic Safety Terms in this set (30) Half Mask or Mouthpiece The respirator that would be used where dust or solid particles might be inhaled Blood Hepatitis can be caused by contact with Type C Soil Benching systems are prohibited in compe

NCCER 00101-15 Basic Safety Terms in this set (30) Half Mask or Mouthpiece The respirator that would be used where dust or solid particles might be inhaled Blood Hepatitis can be caused by contact with Type C Soil Benching systems are prohibited in competent person A personal fall arrest system should be inspected monthly by a reinforced plastic Hard hats should be made of fiberglass or Class C extinguisher What type of fire extinginsher would be used on an electric motor that has overheated and caught fire Middle of the back The D-ring or support point on a safety harness should be placed Type C In the absence of other information, all soil in an excavation should be treated as if it is Lockout/tagout devices A system that protects workers from the release of hazardous energy while they work with machines and equipment is referred to as Safety is a learned behavior and attitude Which of these is a true statement regarding safety Cover the opening and label the cover If thier is a hole in the floor of a structure, the preferred method of protecting workers from falls is to Three wire system One of the most common grounding systems used for protection against accidental electrical shock is the risk A measure of the probability, consequences, and exposure related to an event is referred to as entry permit The type of permit that must be issued before a permit-required confined space can be accessed is called Unsafe Conditions Poor lighting, excessive noise, and inadequent guards for moving parts are examples of 2 feet (61cm) away A good general rule about hearing protection is that it should be used if you must raise your voice for someone to hear you when they are The person who applied them In a lockout/tagout situation, a personal lock and tag must be removed by Toeboards, debris nets, or canopies to catch When performing over head work on scaffolding, what protective measures must be taken to prevent objects from falling and striking a person below NCCER 00101-15 Basic Safety Paint One source of lead on some job sites is Positioning Lanyards that have no shock-absorbing features are used for 4:1 height - to-base ratio When stacking materials such as bricks or block, do not stack materials beyond a heat stroke Which of the following conditions is considered life threatening Double insulated tools A polarized electrical receptacle is used for Competent person Daily inspection of an excavation must be performed by a Report it to a supervisor avoid disturbing it When there is the potential to be exposed to asbestos, workers must Screen the work area with welding shields When other workers are working near a welding operation, the standard practice is to The body temperature rises slightly Heat exhaustion differs from heat stroke in that Job Safety analysis The activity that consists of breaking a job into its component tasks and then analyzing each step for potential hazards is called a 3 feet When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least