100% TRUSTED workings
NST2602
Assignme
nt 3 2024
- DUE 16
July 2024
[Pick the date]
[Type the document subtitle]
, Exam (elaborations)
NST2602 Assignment 3 (COMPLETE ANSWERS) 2024
(213894) - DUE 16 July 2024
Course
Natural Science and Technology for Classroom IV (NST2602)
Institution
University Of South Africa (Unisa)
Book
Natural Sciences - Technology - Grade 4-6 CAPS
NST2602 Assignment 3 (COMPLETE ANSWERS) 2024 (213894) - DUE 16
July 2024 ;100% TRUSTED workings, explanations and solutions
Question 1 (True or False) Answer 1. Engineering graphics and design (EGD)
impact only on technological applications than academic applications. 2.
Electrical technology (electrical system and control) is purposed to build a
formation in electrical, electronic, and digital principles. 3. The technological
practice comprises cultural, organisational and technical aspects. 4. The view
that is value-neutral suggests it is unbiased in relation to values and that its
value depends on its application. 5. No one may design, manufacture, sell, or
install an electric fence without adhering to the health and safety standard
stipulated in the Regulations. 6. Various items of electrical machinery motors,
cables, and control equipment are used collectively as a system hence the
selection, preparation, installation, and protection safety when they are used
separately. 7. Shear forces are sketched to measure the graphical magnitude
of a shared force at any point where the load is applied. 8. Construction work
involves aspects of civil technology such as earthworks, but it is not
waterproof. 9. One point perspective defines the position of the eye and draws
the view of the picture plane and the model. 10. The art of representing 3D
objects on a 2D surface to give the right impression of the height, width,
depth, and position in relation to each other is referred to as projection. 11.
The hand jack works based on the force that is produced by means of
presence when lifting heavy objects. 12. A hand drill is the only tool in which
bevel gears of unequal size are used. [24]
1. Is this true or false? Engineering graphics and design, also known as
EGD, have a greater impact on technological applications than academic
NST2602
Assignme
nt 3 2024
- DUE 16
July 2024
[Pick the date]
[Type the document subtitle]
, Exam (elaborations)
NST2602 Assignment 3 (COMPLETE ANSWERS) 2024
(213894) - DUE 16 July 2024
Course
Natural Science and Technology for Classroom IV (NST2602)
Institution
University Of South Africa (Unisa)
Book
Natural Sciences - Technology - Grade 4-6 CAPS
NST2602 Assignment 3 (COMPLETE ANSWERS) 2024 (213894) - DUE 16
July 2024 ;100% TRUSTED workings, explanations and solutions
Question 1 (True or False) Answer 1. Engineering graphics and design (EGD)
impact only on technological applications than academic applications. 2.
Electrical technology (electrical system and control) is purposed to build a
formation in electrical, electronic, and digital principles. 3. The technological
practice comprises cultural, organisational and technical aspects. 4. The view
that is value-neutral suggests it is unbiased in relation to values and that its
value depends on its application. 5. No one may design, manufacture, sell, or
install an electric fence without adhering to the health and safety standard
stipulated in the Regulations. 6. Various items of electrical machinery motors,
cables, and control equipment are used collectively as a system hence the
selection, preparation, installation, and protection safety when they are used
separately. 7. Shear forces are sketched to measure the graphical magnitude
of a shared force at any point where the load is applied. 8. Construction work
involves aspects of civil technology such as earthworks, but it is not
waterproof. 9. One point perspective defines the position of the eye and draws
the view of the picture plane and the model. 10. The art of representing 3D
objects on a 2D surface to give the right impression of the height, width,
depth, and position in relation to each other is referred to as projection. 11.
The hand jack works based on the force that is produced by means of
presence when lifting heavy objects. 12. A hand drill is the only tool in which
bevel gears of unequal size are used. [24]
1. Is this true or false? Engineering graphics and design, also known as
EGD, have a greater impact on technological applications than academic
