Boilermaker test UPS Exam Questions And Answers

Boilermaker test UPS Exam Questions And Answers When working on an exchanger tube side hydro test, the - ANS CHANNEL HEAD How many bolts need to be removed from a 12 bolt flange when installing gasket? - ANS 5 One of the main factors to consider when installing an orifice plate is: - ANS Direction of flow When cutting a stud bolt, which end of the bolt should be saved? - ANS - STAMPED - STENCILED - MARKED The method of pulling and rigging out an exchanger bundle without equipment is called a CONVENTIONAL pull. - ANS - TRUE One of the most common internal components used to slow the f called a. DEMISTER_ pad. - ANS - TRUE Bundle straps should be aligned with the exchanger bundle BAFFLE plate when rigging an - ANS - TRUE SOFTENERS.. should be put into place when chokers come into contact with sharp surfaces or edges. - ANS - TRUE What are the two different classifications of manways on towers? - ANS - INTERNAL - EXTERNAL Which exchanger head is always absent on a u-tube bundle? - ANS FLOATING HEAD A pipe union has a flow direction. - ANS - TRUE To properly install an exchanger head and make sure the gasket seats properly you should: - ANS Glue gasket to the proper gasket surface, where the gasket will catch ou that gasket surface preventing it from rolling By order of hitch strength, which is the correct order (strongest to weakest) - ANS Basket, vertical, choke You should first a spring can before removing any piping or equipment - ANS CHOCK Who gives the crane operator hand signals when performing a lift? - ANS THE PERSON ASSIGNED PRIOR TO THE UFT The lift capacity is 8 tons and the ball weighs 900 lbs, what is the heaviest load that can be lifted safely? - ANS 15,100 lbs You should start at the gap of a loose flange to complete a solid and square bolt up. - ANS -WIDEST -BIGGEST