NCCER/OSHA Scaffold SG | Exam Questions and answers, rated A+[LATEST EXAM UPDATES]

NCCER/OSHA Scaffold SG | Exam Questions and answers, rated A+ The footing or anchorage for scaffolds must be capable of carrying the maximum intended load without: - Tying or guying Erectors of a scaffold who exposed to potential falling object hazards shall be provided with: - Over head protection Osha requires a rest landing at intervals not exceed: - 35 feet The top handrail of a scaffold must be able to withstand how many pounds of pressure? - 200 When Building a scaffold inside a "goggle area" - Everyone inside the area must wear goggles The ladder should be located on a mobile scaffold will not - tip over When should ties be installed? - During the erection process What body produces the primary Code or regulations guiding the scaffolding industry? - OSHA (Occupational Safety and Healthy Agency) What should be used to erect scaffolding on uneven ground? - Leveling Jacks OSAH specifically prohibits the use of? - Lean to scaffolds Boards or wooden pad placed on the soil to support scaffold legs are? - Mudsills The tube of a tube and clamp scaffold is normally what size O.D.? - 1.9 Inches Scaffold decks that overlap a minimum of how many inches, unless secured in some other way? - 12 the bearer in a tube and clamp scaffold is always? - Placed above the adjacent runner. What must a rolling scaffold have on each caster or roller? - Positive locking device Who must inspect a scaffold each work shift and after any occurrence which could effect a scaffold's structural integrity? - Competent person What is the minimum tensile strength of D-rings and snap hooks on a safety harness? - 5,000 pounds What part of the picture is identified by the letter "G"? - Sill or mudsill what part of the scaffold is identified by letter "A"? - Guardrail What part of the scaffold is identified by the letter "C"? - Runne