2024 PA Appraisers License Exam / PA Appraisers License Exam Questions and Answers (100% Satisfied) 2024 How is a diamond condition fixed? - CORRECT ANSWER-By pulling the damage for length. Diamond is a length condition When measuring a unibody vehicl

2024 PA Appraisers License Exam / PA Appraisers License Exam Questions and Answers (100% Satisfied) 2024 How is a diamond condition fixed? - CORRECT ANSWER-By pulling the damage for length. Diamond is a length condition When measuring a unibody vehicle, it is discovered that the left front rail is 111mm from spec in width. What condition is this? - CORRECT ANSWER-Width is calculated from the center out, so a value of -111mm on the left rail shows sway to the right and in toward centerline A collision-damaged vehicle is discovered to be down in height at the opposite end of the center section. What condition is this frame in? - CORRECT ANSWER-Twist condition When diagnosing the damage to a full frame assembly on a sport utility vehicle, it is determined that the left side frame rail is higher than the right side frame rail. Technician A says the damaged state is known as a twist condition. Technician B says a sway condition exists. Who is right? - CORRECT ANSWER-Tech A. When a frame rail's relationship to the vehicle centerline is changed, such as pushed either to the left or right, the condition is known as sway. "Twist" refers to the condition of the frame when entire sections are driven higher or lower than the opposite side.