OSHA 30 CONSTRUCTION FINAL EXAM LATEST
2024 WITH EXPERT CERTIFIED QUESTIONS
AND ANSWERS I ALREADY GRADED A+ NEW!
1. A ladder with the following rating should NOT be used on the construction site?
A. Type IAA
B. Type IA
C. Type II
D. Type III (correct answer)
2. What do we know about the Hazard Communication Standard label requirements?
A. There is no standard format, just required elements (correct answer)
B. There are 19 required elements
C. There are only 3 required elements
3. A ladder with the following rating should NOT be used on the construction site?
A. Type IAA
B. Type IA
C. Type II
D. Type III (correct answer)
,4. Minimum clearance distances from power lines include:
A. Up to 50kV AC = 10 feet
B. Over 50kV AC to 200 kV = 15 feet
C. All other voltages = 75 feet
D. Both A and B above (correct answer)
E. All of the above
5. Soils may be classified as type:
A. A, B and C (correct answer)
B. 1, 2 and 3
C. All of the above
D. None of the above
6. There are many reasons and causes that can result in a back injury. One of the most common is:
A. Lifting improperly or too much weight
B. Materials placed on flat concrete
C. Turning upper body while lifting or carrying
D. Both A and C (correct answer)
E. None of the above
7. What is true about Safeguards?
, A. The Safeguard must be Secure and tamper-resistant
B. Guards and safety devices should be made of durable material
C. Safeguards should Create no new hazards or interference
D. All of the above (correct answer)
8. Leading causes of jobsite fires include:
A. Please select the best answer
B. Easily ignitable flammable materials (e.g. paint)
C. Easily ignitable combustible materials (e.g. paper and cardboard)
D. The use of a hot work permit
E. Both a and b above (correct answer)
9. Training associated with steel erection activities must include procedures for fall protection
systems. Please select the best answer
A. Identifying, protecting and reporting
B. Erecting, maintaining, disassembling and inspecting (correct answer)
C. Identifying, buying and selling
D. All of the above
E. None of the above
10. The minimum clearance between power lines and any part of a crane or load is
A. 10 feet for lines rated 50 kV or below
B. 5 feet for lines rated 50 kV or below
2024 WITH EXPERT CERTIFIED QUESTIONS
AND ANSWERS I ALREADY GRADED A+ NEW!
1. A ladder with the following rating should NOT be used on the construction site?
A. Type IAA
B. Type IA
C. Type II
D. Type III (correct answer)
2. What do we know about the Hazard Communication Standard label requirements?
A. There is no standard format, just required elements (correct answer)
B. There are 19 required elements
C. There are only 3 required elements
3. A ladder with the following rating should NOT be used on the construction site?
A. Type IAA
B. Type IA
C. Type II
D. Type III (correct answer)
,4. Minimum clearance distances from power lines include:
A. Up to 50kV AC = 10 feet
B. Over 50kV AC to 200 kV = 15 feet
C. All other voltages = 75 feet
D. Both A and B above (correct answer)
E. All of the above
5. Soils may be classified as type:
A. A, B and C (correct answer)
B. 1, 2 and 3
C. All of the above
D. None of the above
6. There are many reasons and causes that can result in a back injury. One of the most common is:
A. Lifting improperly or too much weight
B. Materials placed on flat concrete
C. Turning upper body while lifting or carrying
D. Both A and C (correct answer)
E. None of the above
7. What is true about Safeguards?
, A. The Safeguard must be Secure and tamper-resistant
B. Guards and safety devices should be made of durable material
C. Safeguards should Create no new hazards or interference
D. All of the above (correct answer)
8. Leading causes of jobsite fires include:
A. Please select the best answer
B. Easily ignitable flammable materials (e.g. paint)
C. Easily ignitable combustible materials (e.g. paper and cardboard)
D. The use of a hot work permit
E. Both a and b above (correct answer)
9. Training associated with steel erection activities must include procedures for fall protection
systems. Please select the best answer
A. Identifying, protecting and reporting
B. Erecting, maintaining, disassembling and inspecting (correct answer)
C. Identifying, buying and selling
D. All of the above
E. None of the above
10. The minimum clearance between power lines and any part of a crane or load is
A. 10 feet for lines rated 50 kV or below
B. 5 feet for lines rated 50 kV or below
