Neiep 200 Final Test With Verified Answers 2024/2025

Neiep 200 Final Test With Verified Answers 2024/2025 you are about to loosen a fishplate bolt. which wrench would be least likely to slip? - CORRECT ANSWER-a. 6 point box end wrench b. 12 point box end wrench c. open end wrench you are using a plumb line to check a rail for plumb. you find that at the top it measures 1" and at the bottom it measures 1 1/4". what does this tell you? - CORRECT ANSWER-a. the top of the rail needs to go towards the center b. the top of the rail needs to go toward the wall c. the bottom of the rail needs to go toward the wall you are plumbing rails on a high rise installation. what type of plumb line should you use? - CORRECT ANSWER-a. nylon string b. monofilament wire c. piano wire you need to cut into a concrete wall. which tool should you use? - CORRECT ANSWER-disc grinder with a diamond blade disc you need to select a heavy duty drill for drilling 5/8" holes in a machine beam. what factor determines the drill rating? - CORRECT ANSWER-chuck size you are tasked with setting 3/4" concrete anchors. which type of drill should you use? - CORRECT ANSWER-rotary hammer you need to cut and 8ft section of 1/2" EMT conduit pipe. what would be the best tool for the job? - CORRECT ANSWER-hacksaw with 24 teeth per inch you are directed to move oxy-acetylene cylinders from a storage area to a work site. what is the proper way to transport them? - CORRECT ANSWER-in an upright position you are setting up welding equipment. what is the maximum psi that the regulator for the acetylene gas may be adjusted to? - CORRECT ANSWER-10-12 psi you are using rollers to move a heavy elevator machine and are approaching a corner. which technique should you use to maneuver around it? - CORRECT ANSWER-angle front roller gradually and continue around the corner you are preparing to unload a truck at the loading dock and the truck is 8" higher than the dock. what do you do? - CORRECT ANSWER-use a steel plate to span the gap