NACE CIP Level 1 Standards (2024/2025) Graded A+

NACE CIP Level 1 Standards (2024/2025) Graded A+ ASTM D3276 - Answer ️️ -Standard Guide for Painting Inspectors. States that the minimum surface temperature for coating is usually 40F, max is 125F. ISO 8501 St3 - Answer ️️ -Very Thorough Hand and Power Tool Cleaning. Same as for St2, but the surface shall be treated much more thoroughly to give a metallic sheen arising from the metallic substrate. NACE 4 (SSPC-SP7) - Answer ️️ -Brush off Cleaning. Same cleanliness as NACE 1 (SSPC- SP5) and tightly adherent mill scale, rust, and coating may remain on the surface. SSPC-SP3 - Answer ️️ -Power Tool Cleaning ISO 8501 Sa 2.5 - Answer ️️ -Very Thorough Blast Cleaning NACE 8 (SSPC-SP 14) - Answer ️️ -Industrial Blast Cleaning. Lightly adherent mill scale, rust, and coating residue are permitted to remain on 10% of each unit area of the surface. NACE 8 (SSPC-SP 14) Lightly adherent mill scale, rust, and coating residue are permitted to remain on ____ of each unit area of the surface. - Answer ️️ -10 SSPC-VIS 3 - Answer ️️ -Visual Guide for Rust Grades. Rust Grades A-D (A is the worse) SSPC SP-1 - Answer ️️ -Solvent Pre Cleaning