Exam 2026/2027 | 200
Verified Questions &
Answers | PAE1Ah
Certification | Instant
Download
Section 1: Safety (WHS / OH&S)
Question 1
What is the primary purpose of the Alberta Occupational
Health and Safety (OHS) Act regarding plumbing
contractors?
A) To establish standardized pipe sizing methods
B) To govern the sale of plumbing fixtures
C) To protect the health and safety of workers at the job
site
D) To regulate water pressure in municipal systems
Correct Answer: C) To protect the health and safety of
workers at the job site
,Rationale: The Alberta OHS Act establishes the legal
framework for workplace safety, requiring employers and
contractors to ensure a safe work environment for all trades,
including plumbing.
Question 2
When working in a trench, what is the minimum
requirement for locating underground utilities before
digging in Alberta?
A) A verbal agreement with the neighbor
B) A ground disturbance request through the Alberta One-
Call system
C) A visual inspection of the surface only
D) A permit from the plumbing supplier
Correct Answer: B) A ground disturbance request
through the Alberta One-Call system
Rationale: Alberta regulations require contacting Alberta
One-Call (or a similar approved notification system) to have
underground facilities located and marked before any
ground disturbance to prevent striking gas, electrical, or
water lines.
Question 3
Which document is required to be readily available on a
plumbing job site to identify hazardous materials?
A) The National Plumbing Code
B) Safety Data Sheets (SDS)
,C) The contractor’s business license
D) A blueprint of the drainage system
Correct Answer: B) Safety Data Sheets (SDS)
Rationale: Under WHMIS and Alberta OHS requirements,
Safety Data Sheets must be accessible to workers for any
hazardous products (such as solvents, fluxes, or gases) used
on site.
Question 4
What is the minimum personal protective equipment (PPE)
typically required when soldering copper pipe?
A) Safety glasses and heat-resistant gloves
B) A full face respirator
C) Steel-toed boots only
D) Hearing protection only
Correct Answer: A) Safety glasses and heat-resistant
gloves
Rationale: Soldering involves open flame and hot materials;
eye protection and appropriate gloves are standard
minimum PPE for this task.
Question 5
In Alberta, who is ultimately responsible for ensuring that a
plumbing installation complies with the Safety Codes Act?
A) The apprentice
B) The building owner
, C) The certified plumbing contractor
D) The fixture manufacturer
Correct Answer: C) The certified plumbing contractor
Rationale: Under the Safety Codes Act, the certified
contractor is responsible for pulling permits and ensuring
the work performed meets the applicable codes.
Section 2: Tools & Equipment
Question 6
Which tool is specifically designed for cutting internal
burrs from the inside of copper tubing after a cut?
A) A tubing cutter
B) A reamer
C) A flaring tool
D) A swaging tool
Correct Answer: B) A reamer
Rationale: A reamer is used to remove the internal burr
created by a tubing cutter, which is essential to maintain
proper flow and prevent turbulence in the pipe.
Question 7
What is the primary function of a pressure balancing valve
in a shower system?