INSTALLER TECH/ELECTRICAL JOB INFO 3 2ND ED
UPDATED ACTUAL EXAM QUESTIONS AND CORRECT
ANSWERS
Question 1.
locations that are hazardous because of the present combustible dust, defines a __________?
ANSWER
Class II Location
Question 2.
A plastic corrugated raceway of circular cross section that is resistant to moisture and chemical
atmospheres, and that is flame retardant defines _________?
ANSWER
Electrical Nonmetallic Tubing (ENT)
Question 3.
A bushing is used where conductors enter or leave the raceway system. True or false?
ANSWER
True
Question 4.
Which is an example of where a mud ring would be used?
A. Ceiling fixture
B. Receptacle
C. Switch
D. All of the Above
ANSWER
D. All of the above
, Question 5.
An enclosure used for splitting circuits into different branches defines a(n) __________ box.
ANSWER
Junction
Question 6.
Those locations in which flammable gasses or vapors are or may be present in the air in quantities
sufficient to produce explosive or ignitable mixtures, define a _________?
ANSWER
Class I Location
Question 7.
A barrier added inside an electrical box to separate communication and power circuits is called a
__________?
ANSWER
Low voltage partition
Question 8.
EMT is commonly called thickwall. True or false?
ANSWER
False
Question 9.
A splice box is commonly called a junction box. True or false?
ANSWER
True
Question 10.
What is the trade name for nonmetallic sheathed cable?
ANSWER
Romex
UPDATED ACTUAL EXAM QUESTIONS AND CORRECT
ANSWERS
Question 1.
locations that are hazardous because of the present combustible dust, defines a __________?
ANSWER
Class II Location
Question 2.
A plastic corrugated raceway of circular cross section that is resistant to moisture and chemical
atmospheres, and that is flame retardant defines _________?
ANSWER
Electrical Nonmetallic Tubing (ENT)
Question 3.
A bushing is used where conductors enter or leave the raceway system. True or false?
ANSWER
True
Question 4.
Which is an example of where a mud ring would be used?
A. Ceiling fixture
B. Receptacle
C. Switch
D. All of the Above
ANSWER
D. All of the above
, Question 5.
An enclosure used for splitting circuits into different branches defines a(n) __________ box.
ANSWER
Junction
Question 6.
Those locations in which flammable gasses or vapors are or may be present in the air in quantities
sufficient to produce explosive or ignitable mixtures, define a _________?
ANSWER
Class I Location
Question 7.
A barrier added inside an electrical box to separate communication and power circuits is called a
__________?
ANSWER
Low voltage partition
Question 8.
EMT is commonly called thickwall. True or false?
ANSWER
False
Question 9.
A splice box is commonly called a junction box. True or false?
ANSWER
True
Question 10.
What is the trade name for nonmetallic sheathed cable?
ANSWER
Romex