NCCER/OSHA Scaffold SG Exam || Most Recent Exam 2026
Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ |
Assured Success | Newest Exam | Just Released!!
What is the perimeter of a structure that is 30 feet on all four
sides? - ANSWER-
120
feet
According to OSHA, a light-duty scaffold is designed and
constructed to carry a
working load of how many pounds per square foot? -
ANSWER-25
Scaffolds and their components shall be capable of
supporting, without failure,
how many pounds per square foot? -
ANSWER-4
Where should the bottom runners/ledger of a tube and
coupler scaffold be
located? - ANSWER-As close to the base
as possible
,Runners, bearers, ledgers, transoms are all used in what part
of a scaffolding
system? - ANSWER-
Horizontal
Side brackets on a scaffold should not be used? - ANSWER-to
store equipment
Tube and couplers scaffold legs should be set on? -
ANSWER-Twist lock or
open tube base
plates
What type of clamp is used to put a diagonal brace on a
tube and coupler
scaffold? - ANSWER-
Swivel
When installing a stationary scaffold, when should ties
be installed? -
ANSWER-During the erection
process
According OSHA, a medium duty scaffold is designed and
constructed to carry
a working load of how many pounds per square foot? -
ANSWER-50
, To prevent damage to the hoisting equipment or to avoid
overturning the scaffold, Always ensure that the weight to be
lifted does not exceed the? - ANSWER-rated load
On a tube and clamp scaffold, diagonal are usually installed at
a ? - ANSWER-
45 degree
angle
The bearers for a working platform on a typical tube and
clamp scaffold are
installed? - ANSWER-Above the
runners
On a tube and clamp scaffold right angle clamps are used to? -
ANSWER-Join
horizontal poles to
vertical poles
What should be used to brace mobile scaffolds properly? -
ANSWER-Both
cross bracing and horizontal
bracing
When hanging a scaffold is erected on the side of a tower, good
practice Requires that a safety clamp be placed on the? -
ANSWER-Top and bottom corners of a diagonal brace
Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ |
Assured Success | Newest Exam | Just Released!!
What is the perimeter of a structure that is 30 feet on all four
sides? - ANSWER-
120
feet
According to OSHA, a light-duty scaffold is designed and
constructed to carry a
working load of how many pounds per square foot? -
ANSWER-25
Scaffolds and their components shall be capable of
supporting, without failure,
how many pounds per square foot? -
ANSWER-4
Where should the bottom runners/ledger of a tube and
coupler scaffold be
located? - ANSWER-As close to the base
as possible
,Runners, bearers, ledgers, transoms are all used in what part
of a scaffolding
system? - ANSWER-
Horizontal
Side brackets on a scaffold should not be used? - ANSWER-to
store equipment
Tube and couplers scaffold legs should be set on? -
ANSWER-Twist lock or
open tube base
plates
What type of clamp is used to put a diagonal brace on a
tube and coupler
scaffold? - ANSWER-
Swivel
When installing a stationary scaffold, when should ties
be installed? -
ANSWER-During the erection
process
According OSHA, a medium duty scaffold is designed and
constructed to carry
a working load of how many pounds per square foot? -
ANSWER-50
, To prevent damage to the hoisting equipment or to avoid
overturning the scaffold, Always ensure that the weight to be
lifted does not exceed the? - ANSWER-rated load
On a tube and clamp scaffold, diagonal are usually installed at
a ? - ANSWER-
45 degree
angle
The bearers for a working platform on a typical tube and
clamp scaffold are
installed? - ANSWER-Above the
runners
On a tube and clamp scaffold right angle clamps are used to? -
ANSWER-Join
horizontal poles to
vertical poles
What should be used to brace mobile scaffolds properly? -
ANSWER-Both
cross bracing and horizontal
bracing
When hanging a scaffold is erected on the side of a tower, good
practice Requires that a safety clamp be placed on the? -
ANSWER-Top and bottom corners of a diagonal brace
