DANTE LEVEL 1-3 ACTUAL EXAMS |170 COMPLETE AND GRADED
QUESTIONS AND ANSWERS 2026 LATEST UPDATED | 100% GRADED
CORRECT | 100% GUARANTEED TO PASS | GET A+
Dante audio streams over WiFi networks [are _______________________]. - (ANSWER)not
supported
The bit depth of an audio system dictates - (ANSWER)The amplitude resolution of each sample
Does Dante support MIDI - (ANSWER)No. Dante only transports audio data and does not
interfere with MIDI.
Is there any advantage to using automatic IP addressing on a Dante network - (ANSWER)Yes.
Automatic addressing ensures that devices create a working LAN.
How are device names used in Dante - (ANSWER)Subscriptions are made from name to name
Dante works best with [______________] switches - (ANSWER)gigabit
On a Dante network, latency is - (ANSWER)deterministic, set per device
,As sample rate is increased on a device, what other property is usually changed -
(ANSWER)Channel count is reduced
Where do Dante settings reside? - (ANSWER)On individual Dante devices
In the Dante Controller Routing tab, a green check mark indicates - (ANSWER)Subscription
successful
Which of the following are diagnostic features of Dante Controller? (check all that apply) -
(ANSWER)1. Latency monitoring
2. Clock monitoring
How does Dante interact with Energy Efficient Ethernet (EEE) switches? - (ANSWER)EEE
switches are not recommended for use with Dante
When should fiber be used for an Ethernet connection? - (ANSWER)When runs over 100
meters are required.
, The easiest way to get IP addresses for a functional stand-alone Dante network is for all devices
and computers to - (ANSWER)Use the "obtain an IP Address Automatically" setting
If a network is only used for Dante and has only one network switch, then - (ANSWER)The
network does not require a managed switch
Does Dante require special network cabling? - (ANSWER)Regular CAT5E or CAT6 Ethernet
cable is recommended
How are devices added to a Dante network - (ANSWER)Devices are automatically discovered
and displayed in Dante Controller
Dante uses [_________________________] switches. - (ANSWER)standard
How are devices restored to a Dante network after power cycle - (ANSWER)Devices and
connections are automatically restored
What does the Dante Clock Master do - (ANSWER)Provides synchronization for all Dante
devices on the network
QUESTIONS AND ANSWERS 2026 LATEST UPDATED | 100% GRADED
CORRECT | 100% GUARANTEED TO PASS | GET A+
Dante audio streams over WiFi networks [are _______________________]. - (ANSWER)not
supported
The bit depth of an audio system dictates - (ANSWER)The amplitude resolution of each sample
Does Dante support MIDI - (ANSWER)No. Dante only transports audio data and does not
interfere with MIDI.
Is there any advantage to using automatic IP addressing on a Dante network - (ANSWER)Yes.
Automatic addressing ensures that devices create a working LAN.
How are device names used in Dante - (ANSWER)Subscriptions are made from name to name
Dante works best with [______________] switches - (ANSWER)gigabit
On a Dante network, latency is - (ANSWER)deterministic, set per device
,As sample rate is increased on a device, what other property is usually changed -
(ANSWER)Channel count is reduced
Where do Dante settings reside? - (ANSWER)On individual Dante devices
In the Dante Controller Routing tab, a green check mark indicates - (ANSWER)Subscription
successful
Which of the following are diagnostic features of Dante Controller? (check all that apply) -
(ANSWER)1. Latency monitoring
2. Clock monitoring
How does Dante interact with Energy Efficient Ethernet (EEE) switches? - (ANSWER)EEE
switches are not recommended for use with Dante
When should fiber be used for an Ethernet connection? - (ANSWER)When runs over 100
meters are required.
, The easiest way to get IP addresses for a functional stand-alone Dante network is for all devices
and computers to - (ANSWER)Use the "obtain an IP Address Automatically" setting
If a network is only used for Dante and has only one network switch, then - (ANSWER)The
network does not require a managed switch
Does Dante require special network cabling? - (ANSWER)Regular CAT5E or CAT6 Ethernet
cable is recommended
How are devices added to a Dante network - (ANSWER)Devices are automatically discovered
and displayed in Dante Controller
Dante uses [_________________________] switches. - (ANSWER)standard
How are devices restored to a Dante network after power cycle - (ANSWER)Devices and
connections are automatically restored
What does the Dante Clock Master do - (ANSWER)Provides synchronization for all Dante
devices on the network
