CM 2215 OSHA 510 Study Guide
Study online at https://quizlet.com/_91awu8
1. Protect safety and OSHA's mission is to
health of America's
workers
2. 11(c) The right of the worker to seek safety and health on the job site without fear
of punishment can be found in Section___ of the OSH Act
3. lower morale and Results of workplace injuries and illnesses may include
increased training
costs
4. specific industry Horizontal standards apply when a condition is not covered by a ___ ___
standard
5. consistent The purpose of OSHA directives, including Enforcement and Compliance
Directives (CPL), is to ensure ___ OSHA regulations
6. cited violation OSHA requires that employers certify that abatement is complete for each
___
7. its workers Creating employer failed to inform employees, other than ___, of damaged
guardrail would result in a "creating" employer receiving a citation under
OSHA's multi-employer citation policy for damaging a guardrail exposing all
employees to a fall hazard.
8. opening, walk In addition to the presentation of credentials, the inspection process includes
through/around, the ___ conference, the ___ inspection, and the ___ conference.
closing
9. partial As a result of a work-related illness or injury, days the employee was only
able to work a ___ shift would be classified as restricted work activity (not
including the day the illness or injury began).
10. 100
1/6
, CM 2215 OSHA 510 Study Guide
Study online at https://quizlet.com/_91awu8
In OSHA Record keeping, an incidence rate is the number of recordable
injuries or illness per ___ full-time workers.
11. following Managers should be an example by knowing and ___ the rules employees
are expected to follow to demonstrate management leadership and commit-
ment to safety and health
12. competent The two main components of an employer's accident and prevention respon-
sibilities required by 1926.20(b) a safety and health program and jobsite
inspections by a ___ person.
13. 100 The maximum travel distance from any point of the protected area to the
nearest fire extinguisher shall not exceed ___ feet
14. visible Accident prevention signs such as; danger, caution, and exit signs shall be
___ when work is being performed.
15. 3.5 When stopping a fall, a personal fall arrest system, shall bring an employee
to a complete stop and limit the maximum deceleration distance to ___ feet.
16. maintained All hand and power tools, whether paid for by the employer or employee,
shall be ___ in a safe condition.
17. qualified A person who has a recognized degree, certificate, or professional standing
or who has demonstrated his/her ability to solve problems relating to specific
work is a ___ person.
18. sheilded Whenever practicable, all arc welding and cutting operations shall be ___ to
protect employees and other persons working in the vicinity
19. fire Failure to inspect for oil or grease on regulator fittings, valves, or the cap
threads on a cylinder of oxygen can result in ___ or explosion.
20. 6
2/6
Study online at https://quizlet.com/_91awu8
1. Protect safety and OSHA's mission is to
health of America's
workers
2. 11(c) The right of the worker to seek safety and health on the job site without fear
of punishment can be found in Section___ of the OSH Act
3. lower morale and Results of workplace injuries and illnesses may include
increased training
costs
4. specific industry Horizontal standards apply when a condition is not covered by a ___ ___
standard
5. consistent The purpose of OSHA directives, including Enforcement and Compliance
Directives (CPL), is to ensure ___ OSHA regulations
6. cited violation OSHA requires that employers certify that abatement is complete for each
___
7. its workers Creating employer failed to inform employees, other than ___, of damaged
guardrail would result in a "creating" employer receiving a citation under
OSHA's multi-employer citation policy for damaging a guardrail exposing all
employees to a fall hazard.
8. opening, walk In addition to the presentation of credentials, the inspection process includes
through/around, the ___ conference, the ___ inspection, and the ___ conference.
closing
9. partial As a result of a work-related illness or injury, days the employee was only
able to work a ___ shift would be classified as restricted work activity (not
including the day the illness or injury began).
10. 100
1/6
, CM 2215 OSHA 510 Study Guide
Study online at https://quizlet.com/_91awu8
In OSHA Record keeping, an incidence rate is the number of recordable
injuries or illness per ___ full-time workers.
11. following Managers should be an example by knowing and ___ the rules employees
are expected to follow to demonstrate management leadership and commit-
ment to safety and health
12. competent The two main components of an employer's accident and prevention respon-
sibilities required by 1926.20(b) a safety and health program and jobsite
inspections by a ___ person.
13. 100 The maximum travel distance from any point of the protected area to the
nearest fire extinguisher shall not exceed ___ feet
14. visible Accident prevention signs such as; danger, caution, and exit signs shall be
___ when work is being performed.
15. 3.5 When stopping a fall, a personal fall arrest system, shall bring an employee
to a complete stop and limit the maximum deceleration distance to ___ feet.
16. maintained All hand and power tools, whether paid for by the employer or employee,
shall be ___ in a safe condition.
17. qualified A person who has a recognized degree, certificate, or professional standing
or who has demonstrated his/her ability to solve problems relating to specific
work is a ___ person.
18. sheilded Whenever practicable, all arc welding and cutting operations shall be ___ to
protect employees and other persons working in the vicinity
19. fire Failure to inspect for oil or grease on regulator fittings, valves, or the cap
threads on a cylinder of oxygen can result in ___ or explosion.
20. 6
2/6
