ASVAB AUTO AND SHOP INFORMATION LATEST
UPDATE 2025 EXAM WITH 175 QUESTIONS AND
ACCURATE VERIFIED ANSWERS GRADED A+
A measuring device used to measure the depth of holes -Correct
Answer-Depth Gauges
A measuring device used to measure the thickness of small opening -
Correct Answer-Thickness Gauges
A measuring device that measures the number of threads per inch in
threaded fasteners -Correct Answer-Thread Gauges
A measuring device that measures the thickness of wire -Correct
Answer-Wire Gauges
A tool used to check the trueness (accuracy) of an angle;
has 2 arms, called the Blade and the Tongue, that meet at a right angle -
Correct Answer-Square
A tool used for setting and transferring angles. The handle is usually
made of wood or plastic and is connected to a metal blade with a
thumbscrew or wing nut. The blade pivots and can be locked at any
angle by loosening or tightening the thumbscrew. -Correct Answer-
Sliding T-bevel
A tool that shows whether a surface is true;
has 1 or more small tubes filled with liquid and an air bubble -Correct
Answer-Levels
A heavy weight that is suspended from a line; it indicates vertical
trueness -Correct Answer-Plumb bob
The way nail length is measured; abbreviated with a d.
,(a ten-penny nail is a 10d nail) -Correct Answer-Penny System
Nails that are larger than 20-penny. These are measured in inches -
Correct Answer-Spikes
3 types of Nails -Correct Answer-Brads & finishing nails
Common nails
Double-headed nails
These nails have heads that are made to fit flush with or slightly below
the surface of the wood -Correct Answer-Brads and finishing nails
These nails are the most commonly used nails -Correct Answer-
Common nails
These nails have 2 heads, one lower than the other, and a point on the
other end. The nail is driven to the lower head but can be pulled out of
the material because of the remaining higher head.
Used for temporary construction that will be taken apart -Correct
Answer-Double-headed nails
Nails, screws, and bolts are ___ ? -Correct Answer-Fasteners
Screws that are used to fasten wood -Correct Answer-Wood screws
Screws that have square- or hexagon-shaped heads -Correct Answer-Lag
screws
Fasteners that have flat ends and don't thread into wood.
Held in place by a nut (which is what actually screws into the threads)
and washer. -Correct Answer-Bolts
These screws are used to fasten metal parts, sometimes used with nuts;
come in various lengths and widths and have a wide variety of heads -
Correct Answer-Machine screws
, Nuts that are rounded and smooth -Correct Answer-Cap nuts
Nuts that prevent the screw or bolt from coming loose -Correct Answer-
Stop nuts
Nut that have flanges on each side so they can be tightened by hand -
Correct Answer-Wing nuts
Prevent damage to the surface of material by preventing the bolt head
from digging into the material -Correct Answer-Washers
Most common type of washer; a simple ring of flat metal -Correct
Answer-Flat washers
Washers that have teeth to prevent them from skipping -Correct Answer-
Shake-proof washers
Washers that have 2 end that dig into the nut and the material to keep the
screw from slipping out -Correct Answer-Split-lock washers
Commonly used to fasten metal parts together especially when weld is
insufficient;
come in a variety of lengths, diameters, and shapes. Material should
match the material being fastened -Correct Answer-Rivets
Used to drive standard rivets -Correct Answer-Bucking bar
Type of rivet that can be driven when only one side of a joint is
accessible -Correct Answer-Pop rivets
What does the Internal Combustion engine burn? -Correct Answer-
Mixture of Gas and Air
(the fuel mixture)
UPDATE 2025 EXAM WITH 175 QUESTIONS AND
ACCURATE VERIFIED ANSWERS GRADED A+
A measuring device used to measure the depth of holes -Correct
Answer-Depth Gauges
A measuring device used to measure the thickness of small opening -
Correct Answer-Thickness Gauges
A measuring device that measures the number of threads per inch in
threaded fasteners -Correct Answer-Thread Gauges
A measuring device that measures the thickness of wire -Correct
Answer-Wire Gauges
A tool used to check the trueness (accuracy) of an angle;
has 2 arms, called the Blade and the Tongue, that meet at a right angle -
Correct Answer-Square
A tool used for setting and transferring angles. The handle is usually
made of wood or plastic and is connected to a metal blade with a
thumbscrew or wing nut. The blade pivots and can be locked at any
angle by loosening or tightening the thumbscrew. -Correct Answer-
Sliding T-bevel
A tool that shows whether a surface is true;
has 1 or more small tubes filled with liquid and an air bubble -Correct
Answer-Levels
A heavy weight that is suspended from a line; it indicates vertical
trueness -Correct Answer-Plumb bob
The way nail length is measured; abbreviated with a d.
,(a ten-penny nail is a 10d nail) -Correct Answer-Penny System
Nails that are larger than 20-penny. These are measured in inches -
Correct Answer-Spikes
3 types of Nails -Correct Answer-Brads & finishing nails
Common nails
Double-headed nails
These nails have heads that are made to fit flush with or slightly below
the surface of the wood -Correct Answer-Brads and finishing nails
These nails are the most commonly used nails -Correct Answer-
Common nails
These nails have 2 heads, one lower than the other, and a point on the
other end. The nail is driven to the lower head but can be pulled out of
the material because of the remaining higher head.
Used for temporary construction that will be taken apart -Correct
Answer-Double-headed nails
Nails, screws, and bolts are ___ ? -Correct Answer-Fasteners
Screws that are used to fasten wood -Correct Answer-Wood screws
Screws that have square- or hexagon-shaped heads -Correct Answer-Lag
screws
Fasteners that have flat ends and don't thread into wood.
Held in place by a nut (which is what actually screws into the threads)
and washer. -Correct Answer-Bolts
These screws are used to fasten metal parts, sometimes used with nuts;
come in various lengths and widths and have a wide variety of heads -
Correct Answer-Machine screws
, Nuts that are rounded and smooth -Correct Answer-Cap nuts
Nuts that prevent the screw or bolt from coming loose -Correct Answer-
Stop nuts
Nut that have flanges on each side so they can be tightened by hand -
Correct Answer-Wing nuts
Prevent damage to the surface of material by preventing the bolt head
from digging into the material -Correct Answer-Washers
Most common type of washer; a simple ring of flat metal -Correct
Answer-Flat washers
Washers that have teeth to prevent them from skipping -Correct Answer-
Shake-proof washers
Washers that have 2 end that dig into the nut and the material to keep the
screw from slipping out -Correct Answer-Split-lock washers
Commonly used to fasten metal parts together especially when weld is
insufficient;
come in a variety of lengths, diameters, and shapes. Material should
match the material being fastened -Correct Answer-Rivets
Used to drive standard rivets -Correct Answer-Bucking bar
Type of rivet that can be driven when only one side of a joint is
accessible -Correct Answer-Pop rivets
What does the Internal Combustion engine burn? -Correct Answer-
Mixture of Gas and Air
(the fuel mixture)
