NetApp Certified Storage Installation Engineer, ONTAP NS0-181 Study Guide | with 100% Correct Answers | Updated & Verified

You were dispatched to install a cluster made up of FAS8060 and FAS8080 controllers. There are three FAS8060 controllers and three FAS8080 controllers. Which solution would provide the largest possible cluster? A. a cluster made up of six nodes B. a cluster made up of five nodes C. a cluster made up of two nodes D. a cluster made up of four nodes - ANS - D. a cluster made up of four nodes You just finished the installation of a new 4-node cluster and the customer asks you to move an already used Ethernet port to a new broadcast domain. Which action would you use to accomplish this task? A. Remove all LIFs on this port and create a new broadcast domain. B. Use the network port broadcast-domain move command. C. Use the network port broadcast-domain split command. D. Use the network port broadcast-domain create command. - ANS - C. Use the network port broadcast-domain split command. You have just configured the customer's first SVM with a LIF IP 10.0.0.10/24. The customer's DNS IP address is 172.16.0.250 and you are unable to ping it from the NetApp storage system, but you are able to ping the gateway and everything else works. In this scenario what is the problem? A. You need to add a static gateway to the LIFs routing group. B. You need to have the DNS server on the same subnet as the LIF IP address. C. You need to add an IPspace and domain broadcast to the port. D. You need to have the customer check the cable. - ANS - A. You need to add a static gateway to the LIFs routing group.