1|Page
CERTIFIED PLAYGROUND SAFETY INSPECTOR (CSPI) EXAM LATEST
2025/2026 ACTUAL EXAM WITH COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS (100% VERIFIED ANSWERS)
|ALREADY GRADED A+| ||PROFESSOR VERIFIED|| ||BRANDNEW!!!||
What would the minimum fall height be for a suspended sitting
trolley ride?
A) 48" or 1,219 mm
B) 64" or 1,625 mm
C) 76" or 1,930 mm
D) 84" or 2,134 mm - ANSWER-C) 76" or 1,930 mm
F2223 helps with _____________________? - ANSWER-
surfacing
When using standard ASTM F3313 means testing with ______
drops at each spot? - ANSWER-3
ASTM F 1292 Test Method: G-Max Threshold - not exceeding
_________? - ANSWER-200 g's
,2|Page
ASTM F1292 Test Method: HIC Benchmark - not exceeding
__________? - ANSWER-1,000 HIC
Fall Heights for Equipment: Sliding Poles- _________ below the
highest part of the pole to the protective surfacing? - ANSWER-
60" or 1,524 mm
Exceptions from Protective Surfacing Requirements- CPSC
Examples: ________________ _____________, sand diggers,
sand boxes, activity walls, play houses, or other ground level
components used with feet on the ground? - ANSWER-Speaking
tubes
An agency is considering the purchase of a spiral slide with a 15'
(4.5 m) high transition platform. Which of the following is the best
source of information to determine an appropriate surfacing
material to install beneath the spiral slide?
A) ASTM F2223
B) surfacing installer
C) surfacing manufacturer
,3|Page
D) ASTM F1292 - ANSWER-C) surfacing manufacturer
The fall height for a 3-dimensional climbing net structure is the:
A) maximum height of the climbing structure
B) distance from the highest member to the surface with an 18"
(457 mm) diameter
C) distance from the surface to the point where a rigid device
contacts the net
D) highest distance of either the interior or the exterior fall height -
ANSWER-D) highest distance from the interior or the exterior fall
height
A CPSI records the following data during field testing on an
engineered wood fiber surfacing in a new playground
-Excessive wood fiber material on the adjacent sidewalk
-No label starting installation of equipment over a hard surface
may cause serious injury or death
-A 24" (610mm) distance from a transfer platform to the surfacing
-A critical height measurement of 205 G's and 1,100 HIC
Which of the following should be completed first?
, 4|Page
A) Sweep the wood fiber off the sidewalk
B) Install the appropriate label
C) Rake below the transfer platform to reduce height to 18" (457
mm)
D) Add surfacing to reduce G-max to 200 and HIC to 1000 -
ANSWER-D) Add surfacing to reduce G-max to 200 and HIC to
1000
Children with Mobility Issues Need Safety- Remember:
____________________; ________________; and _________
______________________? - ANSWER-1) Approach
2) Enter
3) Use
4) Equipment
Wheelchair Parking: the ______________________
______________ within the playground must meet ASTM F1292
impact attenuation criteria where route overlaps with use zone? -
ANSWER-1) accessible
2) route
CERTIFIED PLAYGROUND SAFETY INSPECTOR (CSPI) EXAM LATEST
2025/2026 ACTUAL EXAM WITH COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS (100% VERIFIED ANSWERS)
|ALREADY GRADED A+| ||PROFESSOR VERIFIED|| ||BRANDNEW!!!||
What would the minimum fall height be for a suspended sitting
trolley ride?
A) 48" or 1,219 mm
B) 64" or 1,625 mm
C) 76" or 1,930 mm
D) 84" or 2,134 mm - ANSWER-C) 76" or 1,930 mm
F2223 helps with _____________________? - ANSWER-
surfacing
When using standard ASTM F3313 means testing with ______
drops at each spot? - ANSWER-3
ASTM F 1292 Test Method: G-Max Threshold - not exceeding
_________? - ANSWER-200 g's
,2|Page
ASTM F1292 Test Method: HIC Benchmark - not exceeding
__________? - ANSWER-1,000 HIC
Fall Heights for Equipment: Sliding Poles- _________ below the
highest part of the pole to the protective surfacing? - ANSWER-
60" or 1,524 mm
Exceptions from Protective Surfacing Requirements- CPSC
Examples: ________________ _____________, sand diggers,
sand boxes, activity walls, play houses, or other ground level
components used with feet on the ground? - ANSWER-Speaking
tubes
An agency is considering the purchase of a spiral slide with a 15'
(4.5 m) high transition platform. Which of the following is the best
source of information to determine an appropriate surfacing
material to install beneath the spiral slide?
A) ASTM F2223
B) surfacing installer
C) surfacing manufacturer
,3|Page
D) ASTM F1292 - ANSWER-C) surfacing manufacturer
The fall height for a 3-dimensional climbing net structure is the:
A) maximum height of the climbing structure
B) distance from the highest member to the surface with an 18"
(457 mm) diameter
C) distance from the surface to the point where a rigid device
contacts the net
D) highest distance of either the interior or the exterior fall height -
ANSWER-D) highest distance from the interior or the exterior fall
height
A CPSI records the following data during field testing on an
engineered wood fiber surfacing in a new playground
-Excessive wood fiber material on the adjacent sidewalk
-No label starting installation of equipment over a hard surface
may cause serious injury or death
-A 24" (610mm) distance from a transfer platform to the surfacing
-A critical height measurement of 205 G's and 1,100 HIC
Which of the following should be completed first?
, 4|Page
A) Sweep the wood fiber off the sidewalk
B) Install the appropriate label
C) Rake below the transfer platform to reduce height to 18" (457
mm)
D) Add surfacing to reduce G-max to 200 and HIC to 1000 -
ANSWER-D) Add surfacing to reduce G-max to 200 and HIC to
1000
Children with Mobility Issues Need Safety- Remember:
____________________; ________________; and _________
______________________? - ANSWER-1) Approach
2) Enter
3) Use
4) Equipment
Wheelchair Parking: the ______________________
______________ within the playground must meet ASTM F1292
impact attenuation criteria where route overlaps with use zone? -
ANSWER-1) accessible
2) route
