ASP Exam Prep Questions and Answers
Graded A+
Standard Number for respiratory protection - Correct answer-1910.134
standard number for confined space - Correct answer-1910.146
standard number for powered industrial trucks - Correct answer-1910.178
standard number for bloodborne pathogens - Correct answer-1910.1030
Flash point - Correct answer-the minimum temp. where enough vapor exists above
a material to ignite when exposed to an ignition source
auto-ignition temperature - Correct answer-the minimum temp where a chemical
will ignite without the presence of an ignition source
vapor pressure - Correct answer-the force exerted by the vapor of a material
what's some characteristics of a chemical with a high vapor pressure? - Correct
answer-decreased LEL, higher UEL, and lower ignition temp.
Pyrophoric - Correct answer-class of chemicals that spontaneously combust when
exposed to air
,electrical bonding - Correct answer-method of equilibrating the potential of 2
containers so no differential exists. This doesn't remove charge, just creates a
balance.
Electrical grounding - Correct answer-process of providing a path to Earth that
removes charge from a container
Where is the level of PPE listed for arc flash hazards? - Correct answer-In NFPA
70E (which is the standard of electrical safety in the workplace)
How many categories are there of Arc flash levels of PPE? - Correct answer-4
What PPE fits the following :
up to 4 cal/ cm2.
Flame-resistant long-sleeved shirt, pants, coveralls, and face shield - Correct
answer-Category 1 (Arc Flash Level PPE)
What PPE fits the following :
up to 8 cal/ cm2.
cotton underwear, Flame-resistant long-sleeved shirt, pants, and face shield -
Correct answer-Category 2 (Arc Flash Level PPE)
What PPE fits the following :
, up to 25 cal/ cm2
all category 2 PPE and an additional level 3 arc flash suit - Correct answer-
Category 3 (Arc Flash Level PPE)
What PPE fits the following :
Up to 40 cal/ cm2
all category 2 PPE and an additional level 4 arc flash suit - Correct answer-
Category 4 (Arc Flash Level PPE)
Hot work - Correct answer-Cutting, welding, thermit welding, brazing, soldering,
grinding, thermal spraying, thawing pipe, cad welding, installation of torch-applied
system, or any other similar operation or activity that may cause a fire hazard
What are 4 things that a hot work program must include? - Correct answer-1) an
industrial hygiene assessment
2) noise hazard assessment
3) PPE assessment
4) assessment of fire hazards caused by hot work
Does a hot work permit say anything about a fire watch? - Correct answer-Yes, it
should state tat a fire watch shall be in place for at least 30 minutes after the hot
Graded A+
Standard Number for respiratory protection - Correct answer-1910.134
standard number for confined space - Correct answer-1910.146
standard number for powered industrial trucks - Correct answer-1910.178
standard number for bloodborne pathogens - Correct answer-1910.1030
Flash point - Correct answer-the minimum temp. where enough vapor exists above
a material to ignite when exposed to an ignition source
auto-ignition temperature - Correct answer-the minimum temp where a chemical
will ignite without the presence of an ignition source
vapor pressure - Correct answer-the force exerted by the vapor of a material
what's some characteristics of a chemical with a high vapor pressure? - Correct
answer-decreased LEL, higher UEL, and lower ignition temp.
Pyrophoric - Correct answer-class of chemicals that spontaneously combust when
exposed to air
,electrical bonding - Correct answer-method of equilibrating the potential of 2
containers so no differential exists. This doesn't remove charge, just creates a
balance.
Electrical grounding - Correct answer-process of providing a path to Earth that
removes charge from a container
Where is the level of PPE listed for arc flash hazards? - Correct answer-In NFPA
70E (which is the standard of electrical safety in the workplace)
How many categories are there of Arc flash levels of PPE? - Correct answer-4
What PPE fits the following :
up to 4 cal/ cm2.
Flame-resistant long-sleeved shirt, pants, coveralls, and face shield - Correct
answer-Category 1 (Arc Flash Level PPE)
What PPE fits the following :
up to 8 cal/ cm2.
cotton underwear, Flame-resistant long-sleeved shirt, pants, and face shield -
Correct answer-Category 2 (Arc Flash Level PPE)
What PPE fits the following :
, up to 25 cal/ cm2
all category 2 PPE and an additional level 3 arc flash suit - Correct answer-
Category 3 (Arc Flash Level PPE)
What PPE fits the following :
Up to 40 cal/ cm2
all category 2 PPE and an additional level 4 arc flash suit - Correct answer-
Category 4 (Arc Flash Level PPE)
Hot work - Correct answer-Cutting, welding, thermit welding, brazing, soldering,
grinding, thermal spraying, thawing pipe, cad welding, installation of torch-applied
system, or any other similar operation or activity that may cause a fire hazard
What are 4 things that a hot work program must include? - Correct answer-1) an
industrial hygiene assessment
2) noise hazard assessment
3) PPE assessment
4) assessment of fire hazards caused by hot work
Does a hot work permit say anything about a fire watch? - Correct answer-Yes, it
should state tat a fire watch shall be in place for at least 30 minutes after the hot
