Fire Inspector 2 Exam Questions and
Answers Graded A+
Fire protection engineers have established _____ PSI as a minimum required
residual pressure when computing the available water for flow test results. -
Correct answer-20psi
The most common gallonage rating for horizontal shaft pumps in use today are
_____ - _____ GPM. - Correct answer-500 - 1500 gpm
A fire pump serving a standpipe system should be tested ______ - Correct answer-
weekly
A fire department pumper can effectively supply around ______ feet in a high rise
building depending on hydrant pressure and other factors. - Correct answer-450
feet
Class 2 standpipe is for __________ use - Correct answer-occupational
Standpipe classifications:
1.
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
, 2
3. - Correct answer-1. Fire Dept only
2. Occupant use only
3. Both Fire Dept and Occupant use
NFPA 13D requires _______ for any sprinkler - Correct answer-18 GPM
Minimum water supply for a class 1 or 3 standpipe system is _____ gpm for at
least 30mn with 65psi residual pressure at the highest outlet. - Correct answer-500
Stored material should not be stacked closer than ____ inches to a sprinkler head -
Correct answer-18 inches
_______ system is used when it is especially important that water damage be
prevented, even if the sprinkler pipes should break accidentally. - Correct answer-
Preaction
Fire dampers are usually activated by _____ ______ - Correct answer-fusible links
________ detectors are - activated by heat (expansion) and are self-resetting
(automatic) - Correct answer-Bimetallic
Class ____ fires: fire of flammable and combustible liquids and gases such as
gasoline, kerosene and propane - Correct answer-B
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
Answers Graded A+
Fire protection engineers have established _____ PSI as a minimum required
residual pressure when computing the available water for flow test results. -
Correct answer-20psi
The most common gallonage rating for horizontal shaft pumps in use today are
_____ - _____ GPM. - Correct answer-500 - 1500 gpm
A fire pump serving a standpipe system should be tested ______ - Correct answer-
weekly
A fire department pumper can effectively supply around ______ feet in a high rise
building depending on hydrant pressure and other factors. - Correct answer-450
feet
Class 2 standpipe is for __________ use - Correct answer-occupational
Standpipe classifications:
1.
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
, 2
3. - Correct answer-1. Fire Dept only
2. Occupant use only
3. Both Fire Dept and Occupant use
NFPA 13D requires _______ for any sprinkler - Correct answer-18 GPM
Minimum water supply for a class 1 or 3 standpipe system is _____ gpm for at
least 30mn with 65psi residual pressure at the highest outlet. - Correct answer-500
Stored material should not be stacked closer than ____ inches to a sprinkler head -
Correct answer-18 inches
_______ system is used when it is especially important that water damage be
prevented, even if the sprinkler pipes should break accidentally. - Correct answer-
Preaction
Fire dampers are usually activated by _____ ______ - Correct answer-fusible links
________ detectors are - activated by heat (expansion) and are self-resetting
(automatic) - Correct answer-Bimetallic
Class ____ fires: fire of flammable and combustible liquids and gases such as
gasoline, kerosene and propane - Correct answer-B
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
