1|Page
PIPEFITTER STAR FINAL EXAM 2026 BANK 2
VERSIONS CURRENTLY TESTING EXAM QUESTIONS
WITH DETAILED VERIFIED ANSWERS|| VERIFIED
EXAM!! (100% CORRECT ANSWERS /ALREADY
GRADED A+||LATEST EXAM!!!
Why should the angle between the leg of a sling and the
load never be less than 30 degrees? - Answer-More stress
loads are applied on slings.
What is the weakest part of a chain hoist? - Answer-Lower
hook
An oxyacetylene flame has a peak temperature of
approximately: - Answer-6300°F
What is the purpose of slightly opening/cracking a gas
cylinder valve before installing a gas regulator? - Answer-
clear debris
Why is it important to ensure that no part of the oxygen
handling equipment comes in contact with oil? - Answer-
causes an explosion
,2|Page
What is the constant used to find the travel with a 45
degree offset? - Answer-1.414
What is the constant used to find the offset or advance
with a 45o offset? - Answer-.707
Add: 5 1/8 + 1 1/4 + 4 ½ = - Answer-10 7/8
Subtract: 9 5/8 - 6 15/16 = - Answer-2 11/16
Multiply: 3 1/5 x 1 ¼ x 1 1/3 = - Answer-5 1/3
Divide: 11 ¼ by 2 ½ = - Answer-4 1/2
Change the following to architectural measurements 3.96':
- Answer-3' - 11 ½"
MSDS is part of the "right to know" law. - Answer-t
IDLH is an individual's daily level of hazards - Answer-f
,3|Page
Inhalation, ingestion, absorption and injection are four
routes of entry. - Answer-t
When voltage is applied to a conductor, free electrons: -
Answer-Are impelled along the conductor
The magnetic field around a current-carrying wire: -
Answer-Exists at all points along its length
A lamp has a source of 110 volts and current of 0.9 amps,
what is the resistance of the lamp? - Answer-122.2 ohms
The device used in circuits to prevent damage from
overloads is called a: - Answer-Fuse
A thermocouple: - Answer-Generates a small amount of
voltage when heated
Sensible heat is defined as: - Answer-quantity of heat
involved to change a substance that can be measured
with a thermometer
Latent heat is defined as: - Answer-amount of heat
required to bring about a change in state in a substance
, 4|Page
What causes 90% of all construction injuries and deaths
and are used to help OSHA inspectors improve their
effectiveness? - Answer-Focus Hazards
What is the minimum safe working distance for overhead
power lines? - Answer-10 feet
What is the standard procedure used to safely de-energize
equipment on circuits before they are worked on? -
Answer-Lockout/Tagout
Which of the following is not true about Material Safety
Data Sheets? - Answer-They can be written in any
language
What are the four focus inspections OSHA compliance
officers look for? - Answer-Fall Hazards, Electrical
Hazards, Caught in, Struck by
The sizes of pipe are identified by the measurement called
the: - Answer-Nominal pipe size NPS
Steel pipe is supplied with the following end finish (es): -
Answer-PESC, T & C TBE
PIPEFITTER STAR FINAL EXAM 2026 BANK 2
VERSIONS CURRENTLY TESTING EXAM QUESTIONS
WITH DETAILED VERIFIED ANSWERS|| VERIFIED
EXAM!! (100% CORRECT ANSWERS /ALREADY
GRADED A+||LATEST EXAM!!!
Why should the angle between the leg of a sling and the
load never be less than 30 degrees? - Answer-More stress
loads are applied on slings.
What is the weakest part of a chain hoist? - Answer-Lower
hook
An oxyacetylene flame has a peak temperature of
approximately: - Answer-6300°F
What is the purpose of slightly opening/cracking a gas
cylinder valve before installing a gas regulator? - Answer-
clear debris
Why is it important to ensure that no part of the oxygen
handling equipment comes in contact with oil? - Answer-
causes an explosion
,2|Page
What is the constant used to find the travel with a 45
degree offset? - Answer-1.414
What is the constant used to find the offset or advance
with a 45o offset? - Answer-.707
Add: 5 1/8 + 1 1/4 + 4 ½ = - Answer-10 7/8
Subtract: 9 5/8 - 6 15/16 = - Answer-2 11/16
Multiply: 3 1/5 x 1 ¼ x 1 1/3 = - Answer-5 1/3
Divide: 11 ¼ by 2 ½ = - Answer-4 1/2
Change the following to architectural measurements 3.96':
- Answer-3' - 11 ½"
MSDS is part of the "right to know" law. - Answer-t
IDLH is an individual's daily level of hazards - Answer-f
,3|Page
Inhalation, ingestion, absorption and injection are four
routes of entry. - Answer-t
When voltage is applied to a conductor, free electrons: -
Answer-Are impelled along the conductor
The magnetic field around a current-carrying wire: -
Answer-Exists at all points along its length
A lamp has a source of 110 volts and current of 0.9 amps,
what is the resistance of the lamp? - Answer-122.2 ohms
The device used in circuits to prevent damage from
overloads is called a: - Answer-Fuse
A thermocouple: - Answer-Generates a small amount of
voltage when heated
Sensible heat is defined as: - Answer-quantity of heat
involved to change a substance that can be measured
with a thermometer
Latent heat is defined as: - Answer-amount of heat
required to bring about a change in state in a substance
, 4|Page
What causes 90% of all construction injuries and deaths
and are used to help OSHA inspectors improve their
effectiveness? - Answer-Focus Hazards
What is the minimum safe working distance for overhead
power lines? - Answer-10 feet
What is the standard procedure used to safely de-energize
equipment on circuits before they are worked on? -
Answer-Lockout/Tagout
Which of the following is not true about Material Safety
Data Sheets? - Answer-They can be written in any
language
What are the four focus inspections OSHA compliance
officers look for? - Answer-Fall Hazards, Electrical
Hazards, Caught in, Struck by
The sizes of pipe are identified by the measurement called
the: - Answer-Nominal pipe size NPS
Steel pipe is supplied with the following end finish (es): -
Answer-PESC, T & C TBE
