Asbestos Test Study Guide Exam Questions With 100% Correct Answers |Latest Updated 2025/2026

Asbestos Test Study Guide Exam Questions With 100% Correct Answers |Latest Updated 2025/2026 Category 1 nonfriable asbestos-containing material (AMC) - answer-means asbestos-containing packages, gaskets, resilient floor covering, and asphalt roofing products containing more than 1 percent asbestos as determined using the method specified in appendix E, subpart E, 40 CRF part 763, section 1, Polarized Light Microscopy Category II nonfiriable AMC - answer-means any material, excluding Category I nonfirable AMC, containing more than 1 percent asbestos as determined using the method specified in appendix E, subpart E, 40 CRF part 763, section 1, Polarized Light Microscopy that , when dry, cannot be crumbled, pulverized, or reduced to powder by hand pressure Demolition - answer-means the wrecking of tacking out of any load-supporting structural member of a facility together with any related handling operations or the international burning of any facility Friable asbestos material - answer-means any material containing more than 1 percent asbestos as determined using the method specified in appendix E, subpart E, 40 CRF part 763, section 1, Polarized Light Microscopy that , when dry, can be crumbled, pulverized, or reduced to powder by hand pressure. If the asbestos content is less than 10 percent as determined by a method other than point counting by polarized light microscopy (PLM), verify the asbestos content by point counting using PLM. Regulated asbestos-containing material (RAMC) - answer-means (a) Friable asbestos material, (b) Category I nonfriable AMC that has become friable, (c) Category I nonfirbale AMC that will be or has been subjected to sanding, grinding, cutting, or abrading, or (d) Category II Nonfirable ACM that has become crumbled, pulverized, or recorded, or reduced to powder by the forces expected to act on the material in the course of demolition or renovation operations regulated by this subpartRenovations - answer-means altering a facility or one or more facility components in any way, including the stripping or removal of RAMC from a facility component. Operations in which load-supporting structural members are wrecked or taken out of demolitions. Visible emissions - answer-means any emissions, which are visually detectable with out the help of instruments, coming form RAMC or asbestos-containing waste material, or form any asbestos milling, manufacturing, or fabricating operations. This does not include condensed, uncombined water vapor 61.145 Standard for demolition and renovation (a) 1 (i) - answer-At least 80 linear meters (260 linear feet) on pipes or at least 15 square meters (160 square feet) on another facility components 61.145 Standard for demolition and renovation (a) 1 (ii) - answer-At least 1 cubic meter (35 cubic feet) off facility components where the length or area could not be measured previously Asbestos containing material (AMC) ~ Schools - answer-when referring to school buildings means any material or product which contains more than 1 percent asbestos.