Building automation level 1B ACTUAL
UPDATED QUESTIONS AND CORRECT
ANSWERS
Communication protocol - CORRECT ANSWERS✅✅A (blank) governs the format, signals
passed between devices, and timing to ensure that they are all speaking the same
understandable language
Interoperability - CORRECT ANSWERS✅✅(Blank) is the capability of network devices
from different manufacturers and systems to interact using a common communication
network and language framework
Hierarchical network architecture - CORRECT ANSWERS✅✅(Blank) is a type of network
architecture that limits the interaction between control devices
Flat network architecture - CORRECT ANSWERS✅✅(Blank) is a type of network
architecture that allows any device to communicate with any other device on the network
without the need for a network manager
Not - CORRECT ANSWERS✅✅If a single control device fails on a flat architecture, the
entire system will (blank) be disabled. Individual control devices may fail, but they will not
typically disable any other devices in the process. A control device relying on information
from a failed device is typically programmed to use default fail-safe values until the problem
is remedied
Setback control - CORRECT ANSWERS✅✅(Blank) uses setpoint values that are active
during the unoccupied mode of a building automation system
Lead/Lag - CORRECT ANSWERS✅✅(Blank) control strategy is used to alternate the
operation of two or more similar pieces of equipment in the same system
Control logic - CORRECT ANSWERS✅✅(Blank) is the portion of controller software that
produces the calculated outputs based on the inputs
UPDATED QUESTIONS AND CORRECT
ANSWERS
Communication protocol - CORRECT ANSWERS✅✅A (blank) governs the format, signals
passed between devices, and timing to ensure that they are all speaking the same
understandable language
Interoperability - CORRECT ANSWERS✅✅(Blank) is the capability of network devices
from different manufacturers and systems to interact using a common communication
network and language framework
Hierarchical network architecture - CORRECT ANSWERS✅✅(Blank) is a type of network
architecture that limits the interaction between control devices
Flat network architecture - CORRECT ANSWERS✅✅(Blank) is a type of network
architecture that allows any device to communicate with any other device on the network
without the need for a network manager
Not - CORRECT ANSWERS✅✅If a single control device fails on a flat architecture, the
entire system will (blank) be disabled. Individual control devices may fail, but they will not
typically disable any other devices in the process. A control device relying on information
from a failed device is typically programmed to use default fail-safe values until the problem
is remedied
Setback control - CORRECT ANSWERS✅✅(Blank) uses setpoint values that are active
during the unoccupied mode of a building automation system
Lead/Lag - CORRECT ANSWERS✅✅(Blank) control strategy is used to alternate the
operation of two or more similar pieces of equipment in the same system
Control logic - CORRECT ANSWERS✅✅(Blank) is the portion of controller software that
produces the calculated outputs based on the inputs
