Page 1 of 16
DELL CLIENT ADVANCED EXAM |
UPDATES STUDY BUNDLE WITH COMPLETE SOLUTIONS
| QUESTIONS AND ANSWERS | GRADE A
When the side cover of Precision Tower 7920 is not assembled,
the system will still power on. .....ANSWER.....False
On Latitude 14 Rugged Extreme - 7414, which light is used to
communicate error using Single LED ? .....ANSWER.....not Power
light
We Import a Foreign configuration in a RAID Array, if:
.....ANSWER.....The array containing foreign configuration is in an
Offline state
Select statements that are true about Trusted Platform Module
(TPM) .....ANSWER.....not The Trusted Platform Module (TPM) is
used to generate and store keys
,Page 2 of 16
After completing a service incident on a Precision Tower 7920,
technician attempts to run ePSA before re-assembling the side
cover. However, system is not able to power on and displays LED
error code of 4-7. What could be the issue? .....ANSWER.....The
intrusion switch is triggered and power is cut-off. Install the side
cover to de-activate the intrusion switch.
Before replacing any hardware, what is the recommended
solution for the BSOD or system freezing? .....ANSWER.....not
Reseat the DIMMs
If an Edge Gateway is Blinking green after the diagnostics, what
does it indicate? .....ANSWER.....ePSA Pass
On a Precision Workstation, if a Hard drive status indicator
flashes green, amber and then turns off; this indicates the drive is
rebuilding .....ANSWER.....False
In general, an Anti-Static Mat is used to prevent Electrostatic
damage .....ANSWER.....True
, Page 3 of 16
Onsite Services for Ruggedized Notebooks are limited to CRU
parts and Service Assembly Parts. .....ANSWER.....True
How many thermal performance control modes are there in
Alienware Area 51m to support different user scenarios?
.....ANSWER.....not 1.0
Overclocking is the process of making a computer or component
in a computer operate faster than specified by the manufacturer
by modifying the system parameters .....ANSWER.....True
In a PERC H730P controller, P stands for Performance
.....ANSWER.....True
iDRAC with Lifecycle Controller can be used for:
.....ANSWER.....not OS Deployment
A CAN (Controller Area Network) bus is a vehicle bus standard
designed to allow micro controllers and devices to communicate
with each other in applications without a host computer.
.....ANSWER.....True
DELL CLIENT ADVANCED EXAM |
UPDATES STUDY BUNDLE WITH COMPLETE SOLUTIONS
| QUESTIONS AND ANSWERS | GRADE A
When the side cover of Precision Tower 7920 is not assembled,
the system will still power on. .....ANSWER.....False
On Latitude 14 Rugged Extreme - 7414, which light is used to
communicate error using Single LED ? .....ANSWER.....not Power
light
We Import a Foreign configuration in a RAID Array, if:
.....ANSWER.....The array containing foreign configuration is in an
Offline state
Select statements that are true about Trusted Platform Module
(TPM) .....ANSWER.....not The Trusted Platform Module (TPM) is
used to generate and store keys
,Page 2 of 16
After completing a service incident on a Precision Tower 7920,
technician attempts to run ePSA before re-assembling the side
cover. However, system is not able to power on and displays LED
error code of 4-7. What could be the issue? .....ANSWER.....The
intrusion switch is triggered and power is cut-off. Install the side
cover to de-activate the intrusion switch.
Before replacing any hardware, what is the recommended
solution for the BSOD or system freezing? .....ANSWER.....not
Reseat the DIMMs
If an Edge Gateway is Blinking green after the diagnostics, what
does it indicate? .....ANSWER.....ePSA Pass
On a Precision Workstation, if a Hard drive status indicator
flashes green, amber and then turns off; this indicates the drive is
rebuilding .....ANSWER.....False
In general, an Anti-Static Mat is used to prevent Electrostatic
damage .....ANSWER.....True
, Page 3 of 16
Onsite Services for Ruggedized Notebooks are limited to CRU
parts and Service Assembly Parts. .....ANSWER.....True
How many thermal performance control modes are there in
Alienware Area 51m to support different user scenarios?
.....ANSWER.....not 1.0
Overclocking is the process of making a computer or component
in a computer operate faster than specified by the manufacturer
by modifying the system parameters .....ANSWER.....True
In a PERC H730P controller, P stands for Performance
.....ANSWER.....True
iDRAC with Lifecycle Controller can be used for:
.....ANSWER.....not OS Deployment
A CAN (Controller Area Network) bus is a vehicle bus standard
designed to allow micro controllers and devices to communicate
with each other in applications without a host computer.
.....ANSWER.....True
