1
PTC Creo simulate exam 1 check
your knowledge module 1-9
Questions with 100% Correct Answers
_______________ enables the user to perform Static, Modal, Buckling, Contact,
Prestress Static, and Prestress Modal analyses. Correct Answer: Creo Simulate
Structure
Using the Home tab, you can create Correct Answer: all of the above.
Which statement regarding the Simulate Structure process is FALSE? Correct
Answer: An analysis will always fail if the loads and constraints are applied
before the properties are defined.
True or False? Simulate can only analyze parts, not assemblies. Correct Answer:
False
Which model type is NOT an option in Simulate? Correct Answer: Plane
symmetry
_______________ enables the user to perform Static, Modal, Buckling, Contact,
Prestress Static, Prestress Modal, and Vibration analyses. Correct Answer:
Simulate Structure
True or False? The h- and p-versions of the finite element method are different
ways of adding degrees of freedom to the model. Correct Answer: False
True or False? The Distortion Energy theory is more conservative than the
Maximum Shear Stress theory. Correct Answer: False
:
vPretest - Stuvia US
, 2
Traditional finite element solvers calculate displacements at Correct Answer: the
nodes.
True or False? The strain energy of the total model and comparative stresses
may be used as convergence criteria in Simulate. Correct Answer: True
Which statement best describes the analysis method used by Creo Simulate
Structure? Correct Answer: It uses the P element version of the Finite Element
Method and enhances its own accuracy by automatically adjusting the
degrees of the polynomial shape functions until convergence is achieved.
True or False? The Inheritance Feature is the feature to use if you want to keep
the simulation model independent from the CAD geometry. Correct Answer:
True
True or False? The Remove Feature can be combined with the Inheritance
Feature. Correct Answer: True
To prepare an existing CAD model Correct Answer: all of the above.
Where can you find the results of a user-defined measure after an analysis has
been run? Correct Answer: Both A and B.
Measures can be used Correct Answer: for all of the above.
Which fields need to be defined in the Material Definitions dialog box for a static
analysis with no thermal loads? Correct Answer: The name, density, Poisson's
ratio, and Young's modulus are required.
Which type of materials can be handled by Simulate Structure? Correct Answer:
Isotropic, transversely isotropic, and orthotropic materials
:
vPretest - Stuvia US
PTC Creo simulate exam 1 check
your knowledge module 1-9
Questions with 100% Correct Answers
_______________ enables the user to perform Static, Modal, Buckling, Contact,
Prestress Static, and Prestress Modal analyses. Correct Answer: Creo Simulate
Structure
Using the Home tab, you can create Correct Answer: all of the above.
Which statement regarding the Simulate Structure process is FALSE? Correct
Answer: An analysis will always fail if the loads and constraints are applied
before the properties are defined.
True or False? Simulate can only analyze parts, not assemblies. Correct Answer:
False
Which model type is NOT an option in Simulate? Correct Answer: Plane
symmetry
_______________ enables the user to perform Static, Modal, Buckling, Contact,
Prestress Static, Prestress Modal, and Vibration analyses. Correct Answer:
Simulate Structure
True or False? The h- and p-versions of the finite element method are different
ways of adding degrees of freedom to the model. Correct Answer: False
True or False? The Distortion Energy theory is more conservative than the
Maximum Shear Stress theory. Correct Answer: False
:
vPretest - Stuvia US
, 2
Traditional finite element solvers calculate displacements at Correct Answer: the
nodes.
True or False? The strain energy of the total model and comparative stresses
may be used as convergence criteria in Simulate. Correct Answer: True
Which statement best describes the analysis method used by Creo Simulate
Structure? Correct Answer: It uses the P element version of the Finite Element
Method and enhances its own accuracy by automatically adjusting the
degrees of the polynomial shape functions until convergence is achieved.
True or False? The Inheritance Feature is the feature to use if you want to keep
the simulation model independent from the CAD geometry. Correct Answer:
True
True or False? The Remove Feature can be combined with the Inheritance
Feature. Correct Answer: True
To prepare an existing CAD model Correct Answer: all of the above.
Where can you find the results of a user-defined measure after an analysis has
been run? Correct Answer: Both A and B.
Measures can be used Correct Answer: for all of the above.
Which fields need to be defined in the Material Definitions dialog box for a static
analysis with no thermal loads? Correct Answer: The name, density, Poisson's
ratio, and Young's modulus are required.
Which type of materials can be handled by Simulate Structure? Correct Answer:
Isotropic, transversely isotropic, and orthotropic materials
:
vPretest - Stuvia US
