MSSC QUALITY POST TEST QUESTIONS AND ANSWERS
1. Inspection data requires for making effective manufacturing decisions: - (ANSWER)Accurate data.
2. A feature of all mistake-proofing systems is: - (ANSWER)Automated inspection.
3. A manufacturer has several options to handle nonconforming materials. The option to use a
nonconforming material is acceptable: - (ANSWER)Only if it does not affect performance or cause a
safety hazard.
4. A process SOP should include clearly stated procedures for dealing with nonconforming materials. If
nonconformity is detected and there are no written procedures, it is the responsibility of the frontline
worker to: - (ANSWER)C. Refer the problem to a supervisor or responsible department.
5. Third-party audits provide evidence that a quality program meets standards. A - (ANSWER)...C.
Acquire or maintain certification.
6. An auditor bases his/her audit report on data collected by: - (ANSWER)Directly observing the process.
Interviewing workers and supervisors.
Examining production records.
7. Inspections can be carried out for several purposes, including as a part of continuous improvement.
To perform inspections, workers should know how to: - (ANSWER)Read production documents.
Use inspection and analysis tools
Read safety and environmental standards.
8. A possible source of inaccuracy in inspection data is: - (ANSWER)Human error.
9. Communication breakdowns can lead to inaccuracies and poor decisions.
Detailed instructions for communicating results must be included in every: - (ANSWER)Inspection plan.
, MSSC QUALITY POST TEST QUESTIONS AND ANSWERS
10. The inspection frequency for any given process depends on a number of factors.
This frequency is specified in a (n): - (ANSWER)Sampling plan.
11. The main purpose of inspecting the final product is: - (ANSWER)Product acceptance.
12. Many products require, a record of a material's history. This record is known as
the product's: - (ANSWER)Traceability.
13. In some cases, nonconforming goods are shipped to a customer if the customer
waives the specification. When this happens, workers should: - (ANSWER)Be aware that the shipment is
an exception.
14. Many inspections are performed by frontline workers. Quality management
systems require that the company: - (ANSWER)Provide training of proper procedures for testing.
Include training in health, safety, and environmental procedures.
Keep complete documentation of all training.
15. The purpose of a quality audit is to: - (ANSWER)Provide assurance that the process follows the
guidelines of the quality plan.
16. The three types of quality audits are: - (ANSWER)Internal, external, and third-party.
17. An audit report is always presented to the person or organization requesting the
audit. A summary of each discrepancy from standards should also be available to: -
(ANSWER)Production workers involved in the process.
18. What documentation is required for "first piece" inspections? - (ANSWER)D. In-process form
1. Inspection data requires for making effective manufacturing decisions: - (ANSWER)Accurate data.
2. A feature of all mistake-proofing systems is: - (ANSWER)Automated inspection.
3. A manufacturer has several options to handle nonconforming materials. The option to use a
nonconforming material is acceptable: - (ANSWER)Only if it does not affect performance or cause a
safety hazard.
4. A process SOP should include clearly stated procedures for dealing with nonconforming materials. If
nonconformity is detected and there are no written procedures, it is the responsibility of the frontline
worker to: - (ANSWER)C. Refer the problem to a supervisor or responsible department.
5. Third-party audits provide evidence that a quality program meets standards. A - (ANSWER)...C.
Acquire or maintain certification.
6. An auditor bases his/her audit report on data collected by: - (ANSWER)Directly observing the process.
Interviewing workers and supervisors.
Examining production records.
7. Inspections can be carried out for several purposes, including as a part of continuous improvement.
To perform inspections, workers should know how to: - (ANSWER)Read production documents.
Use inspection and analysis tools
Read safety and environmental standards.
8. A possible source of inaccuracy in inspection data is: - (ANSWER)Human error.
9. Communication breakdowns can lead to inaccuracies and poor decisions.
Detailed instructions for communicating results must be included in every: - (ANSWER)Inspection plan.
, MSSC QUALITY POST TEST QUESTIONS AND ANSWERS
10. The inspection frequency for any given process depends on a number of factors.
This frequency is specified in a (n): - (ANSWER)Sampling plan.
11. The main purpose of inspecting the final product is: - (ANSWER)Product acceptance.
12. Many products require, a record of a material's history. This record is known as
the product's: - (ANSWER)Traceability.
13. In some cases, nonconforming goods are shipped to a customer if the customer
waives the specification. When this happens, workers should: - (ANSWER)Be aware that the shipment is
an exception.
14. Many inspections are performed by frontline workers. Quality management
systems require that the company: - (ANSWER)Provide training of proper procedures for testing.
Include training in health, safety, and environmental procedures.
Keep complete documentation of all training.
15. The purpose of a quality audit is to: - (ANSWER)Provide assurance that the process follows the
guidelines of the quality plan.
16. The three types of quality audits are: - (ANSWER)Internal, external, and third-party.
17. An audit report is always presented to the person or organization requesting the
audit. A summary of each discrepancy from standards should also be available to: -
(ANSWER)Production workers involved in the process.
18. What documentation is required for "first piece" inspections? - (ANSWER)D. In-process form
