WLD206 - Comprehensive Overview of Welding
Symbols Weld Joints Positions and Terminologies
in Fillet and Groove Welding Applications
1F, 2F, 3F, and 4F - Positions a fillet weld are welded in.✅✅✅
1G
2G
3G
4G - Positions a groove weld are welded in.✅✅✅
A right-angled triangle attached to either side of the reference line indicates a: - fillet
weld✅✅✅
A short weld used for temporarily holding material in place is a: - Tack weld.✅✅✅
A weld - Backing weld✅✅✅
A weld deposited at the back of a single groove weld. - Back weld✅✅✅
Bevel angle: - Is the angle between the bevel of a joint member and a plane perpendicular to
the surface of the member.✅✅✅
Bevel: - Is an angular edge preparation.✅✅✅
Describe the welding symbol for a V-groove arrow-side with melt-through. - V-groove
symbol with shaded 1/2 circle✅✅✅
F stands for: - Fillet weld✅✅✅
G stands for: - Groove weld.✅✅✅
Groove angle: - The total included angle of the groove between members.✅✅✅
Groove face: - That surface of a member included in the groove.✅✅✅
Groove radius: - ✅✅✅
Identify the weld size and bevel depth for a V-groove. - 1. depth of bevel
2. size of weld✅✅✅
If the length dimension is not used, the weld will extend the full length of the weld joint. True
or False - True✅✅✅
Symbols Weld Joints Positions and Terminologies
in Fillet and Groove Welding Applications
1F, 2F, 3F, and 4F - Positions a fillet weld are welded in.✅✅✅
1G
2G
3G
4G - Positions a groove weld are welded in.✅✅✅
A right-angled triangle attached to either side of the reference line indicates a: - fillet
weld✅✅✅
A short weld used for temporarily holding material in place is a: - Tack weld.✅✅✅
A weld - Backing weld✅✅✅
A weld deposited at the back of a single groove weld. - Back weld✅✅✅
Bevel angle: - Is the angle between the bevel of a joint member and a plane perpendicular to
the surface of the member.✅✅✅
Bevel: - Is an angular edge preparation.✅✅✅
Describe the welding symbol for a V-groove arrow-side with melt-through. - V-groove
symbol with shaded 1/2 circle✅✅✅
F stands for: - Fillet weld✅✅✅
G stands for: - Groove weld.✅✅✅
Groove angle: - The total included angle of the groove between members.✅✅✅
Groove face: - That surface of a member included in the groove.✅✅✅
Groove radius: - ✅✅✅
Identify the weld size and bevel depth for a V-groove. - 1. depth of bevel
2. size of weld✅✅✅
If the length dimension is not used, the weld will extend the full length of the weld joint. True
or False - True✅✅✅
