IATSE Local 15 - F List Exam entry study
guide (Latest Update )
QUESTIONS WITH 100% CORRECT
ANSWERS
Speakon (NL2, NL4, NL8) - correct answer 2, 4 or 8 conductors. Used to connect
Amplifiers to speakers. NL4/NL8 often have NL2 breakouts at one end. Sound
Ethernet - correct answer 8 conductors. There are several ethernet standards that use
the same connector: Cat5e, and Cat6 are usually used in our industry. Sometimes
found with a locking "Ethercon" connector that looks like a XLR barrel. Some
applications required a shielded version of this type of cable. General, A/V, Data
Edison - correct answer 3 Conductor "normal" extension cord. Generally, non-
grounded is not suitable for our use. Depending on wire gauge and jacket, suitable for
up to 15-amp service. Can also be referred to as a Parallel Bar Ground (PBG). Power
IEC Power - correct answer Many devices requiring standard 120V "wall power" use
this IEC Plug, usually with an Edison plug on one end, and a IEC socket to attach to the
device. Sometimes called a "Computer cable" or a D-Plug.Power
3-Pin XLR - correct answer Standard balanced audio cable. Used for sound sources to
destinations, like microphones to a mixer.*in some cases, specially made 3-pin XLR
cables are used as DMX cables. Audio
Respirator - correct answer Various types of masks protect you from exposure to
dust, airborne biohazards, fumes, or chemical in the air depending on the type of filter
used.These types of respirators have vents that allow air to expel without passing back
through the filter and are not considered acceptable to prevent the spread of
respiratory illnesses.
Dust Mask - correct answer A NIOSH approved dust mask, like an N95, is acceptable
for protection from air-born particles and droplets.If you are using an N95 or any type
of mask to prevent the spread of respiratory illness, it must not feature a valve that
allows exhaled air to bypass the filter.
, IATSE Local 15 - F List Exam entry study
guide (Latest Update )
QUESTIONS WITH 100% CORRECT
ANSWERS
Boots (Safety Toe) - correct answer These protect your foot from piercing damage by
objects on the floor as well as from crushing damage. Many venues Local 15 workers
are employed in require workers to wear ANSI Protective Toe compliant shoes. The
protective toe can be either steel or a composite material.
Tool Belt* - correct answer The tool belt you choose should be capable of carrying all
required tools. You don't need a stealthy one specifically designed for theater—you
should only need it for building, assembling, and loading shows in and out of a venue.
You may find it worthwhile to also keep a smaller tool holder to just keep the
essentials for a given job on you if you find you don't need the entire required tool list
once you've started work.
Crescent Wrench* - correct answer A 6" or 8" adjustable wrench may be the
stagehand's most important tool. Never show up to a job without one. A shorter handle
is fine as long as the jaw opens wide, over 1".It is required for your wrench to have a
place to attach a safety line so the tool can't fall if dropped from any height.
Hammer* - correct answer If you aren't sure which kind to choose, try a standard 12-
ounce claw hammer. A heavier straight claw framing hammer is fine too. Choose
something that comfortable in your hand. Make sure to never use a steel claw hammer
on aluminum truss pins.
Pliers, Wire Cutters* - correct answer Most people prefer 8-inch pliers and wire
cutters. If cutting a lot of zip ties, use flush cutters to avoid leaving a sharp point.
Measuring Tape* - correct answer A 25' tape measure is a good balance between
working length and extra weight on your tool belt.
Multi-Tip Screwdriver* - correct answer Common bits: #2 Phillips, #2
Robertson/Square, various flat heads, 3/16"/1/4"/5/16" Hex, T-25 and T-30 Torx,
, IATSE Local 15 - F List Exam entry study
guide (Latest Update )
QUESTIONS WITH 100% CORRECT
ANSWERS
Torpedo Level - correct answer A standard 9" torpedo level. One with a metal straight
edge is handy.
Socket Wrench and sockets - correct answer The most common imperial socket sizes
for our industry are 7/16", 1/2", 9/16", and 3/4" in some instances.Some scenery is made
overseas and uses metric hardware.
Speed wrenches - correct answer With double sided speed wrenches, you can carry
two tools that will fit almost all bolt sizes we work with.
Screw Gun, Drill Motor - correct answer A screw gun or impact driver uses a rotary
hammering action to drive screws into wood and metal with ease but may not always
be suitable for a delicate job and should not be used for drilling holes.A cordless drill
or drill motor often has a clutch to prevent driving a screw too deep or seizing a drill
bit in a hole.
Multi Tool - correct answer A multi tool with built in pliers, cutters, and a knife is very
handy, but remember that a multi tool is not a substitute for the independent version of
a tool on the required tool list.
Allen Wrench - correct answer Both metric and SAE sets are recommended
Glue gun - correct answer Hot glue is widely used to quickly repair scenery and props.
Never leave a glue gun on its side while plugged in, this is a common cause of fire!
Hand Stapler - correct answer Usually used for attaching textiles into wood. Make
sure to use to the correct staples for the stapler.
Air Compressor - correct answer Before you start work, make sure the compressor
regulator is set to an appropriate pressure for the tool you plan to use and the release
valve is closed.
guide (Latest Update )
QUESTIONS WITH 100% CORRECT
ANSWERS
Speakon (NL2, NL4, NL8) - correct answer 2, 4 or 8 conductors. Used to connect
Amplifiers to speakers. NL4/NL8 often have NL2 breakouts at one end. Sound
Ethernet - correct answer 8 conductors. There are several ethernet standards that use
the same connector: Cat5e, and Cat6 are usually used in our industry. Sometimes
found with a locking "Ethercon" connector that looks like a XLR barrel. Some
applications required a shielded version of this type of cable. General, A/V, Data
Edison - correct answer 3 Conductor "normal" extension cord. Generally, non-
grounded is not suitable for our use. Depending on wire gauge and jacket, suitable for
up to 15-amp service. Can also be referred to as a Parallel Bar Ground (PBG). Power
IEC Power - correct answer Many devices requiring standard 120V "wall power" use
this IEC Plug, usually with an Edison plug on one end, and a IEC socket to attach to the
device. Sometimes called a "Computer cable" or a D-Plug.Power
3-Pin XLR - correct answer Standard balanced audio cable. Used for sound sources to
destinations, like microphones to a mixer.*in some cases, specially made 3-pin XLR
cables are used as DMX cables. Audio
Respirator - correct answer Various types of masks protect you from exposure to
dust, airborne biohazards, fumes, or chemical in the air depending on the type of filter
used.These types of respirators have vents that allow air to expel without passing back
through the filter and are not considered acceptable to prevent the spread of
respiratory illnesses.
Dust Mask - correct answer A NIOSH approved dust mask, like an N95, is acceptable
for protection from air-born particles and droplets.If you are using an N95 or any type
of mask to prevent the spread of respiratory illness, it must not feature a valve that
allows exhaled air to bypass the filter.
, IATSE Local 15 - F List Exam entry study
guide (Latest Update )
QUESTIONS WITH 100% CORRECT
ANSWERS
Boots (Safety Toe) - correct answer These protect your foot from piercing damage by
objects on the floor as well as from crushing damage. Many venues Local 15 workers
are employed in require workers to wear ANSI Protective Toe compliant shoes. The
protective toe can be either steel or a composite material.
Tool Belt* - correct answer The tool belt you choose should be capable of carrying all
required tools. You don't need a stealthy one specifically designed for theater—you
should only need it for building, assembling, and loading shows in and out of a venue.
You may find it worthwhile to also keep a smaller tool holder to just keep the
essentials for a given job on you if you find you don't need the entire required tool list
once you've started work.
Crescent Wrench* - correct answer A 6" or 8" adjustable wrench may be the
stagehand's most important tool. Never show up to a job without one. A shorter handle
is fine as long as the jaw opens wide, over 1".It is required for your wrench to have a
place to attach a safety line so the tool can't fall if dropped from any height.
Hammer* - correct answer If you aren't sure which kind to choose, try a standard 12-
ounce claw hammer. A heavier straight claw framing hammer is fine too. Choose
something that comfortable in your hand. Make sure to never use a steel claw hammer
on aluminum truss pins.
Pliers, Wire Cutters* - correct answer Most people prefer 8-inch pliers and wire
cutters. If cutting a lot of zip ties, use flush cutters to avoid leaving a sharp point.
Measuring Tape* - correct answer A 25' tape measure is a good balance between
working length and extra weight on your tool belt.
Multi-Tip Screwdriver* - correct answer Common bits: #2 Phillips, #2
Robertson/Square, various flat heads, 3/16"/1/4"/5/16" Hex, T-25 and T-30 Torx,
, IATSE Local 15 - F List Exam entry study
guide (Latest Update )
QUESTIONS WITH 100% CORRECT
ANSWERS
Torpedo Level - correct answer A standard 9" torpedo level. One with a metal straight
edge is handy.
Socket Wrench and sockets - correct answer The most common imperial socket sizes
for our industry are 7/16", 1/2", 9/16", and 3/4" in some instances.Some scenery is made
overseas and uses metric hardware.
Speed wrenches - correct answer With double sided speed wrenches, you can carry
two tools that will fit almost all bolt sizes we work with.
Screw Gun, Drill Motor - correct answer A screw gun or impact driver uses a rotary
hammering action to drive screws into wood and metal with ease but may not always
be suitable for a delicate job and should not be used for drilling holes.A cordless drill
or drill motor often has a clutch to prevent driving a screw too deep or seizing a drill
bit in a hole.
Multi Tool - correct answer A multi tool with built in pliers, cutters, and a knife is very
handy, but remember that a multi tool is not a substitute for the independent version of
a tool on the required tool list.
Allen Wrench - correct answer Both metric and SAE sets are recommended
Glue gun - correct answer Hot glue is widely used to quickly repair scenery and props.
Never leave a glue gun on its side while plugged in, this is a common cause of fire!
Hand Stapler - correct answer Usually used for attaching textiles into wood. Make
sure to use to the correct staples for the stapler.
Air Compressor - correct answer Before you start work, make sure the compressor
regulator is set to an appropriate pressure for the tool you plan to use and the release
valve is closed.
