Ironworker NCCER Verified Multiple Choice and
Conceptual Actual Frequently Tested Exam
Questions With Reviewed
100% Correct Detailed Answers
Guaranteed Pass!!Current Update!!
1. Assuming a grip distance of 1", what is the minimum length of the bolt required
for a 3/4" diameter bolt?
A. 2"
B. 2 1/4"
C. 1 3/4"
D. 2 1/2"
2. The location of bridging depends on the length of the:
A. Beam
B. Span
C. Column
D. Girder
3. Before bundles of deck can be landed on a bar joist, what action must be
completed?
A. Install safety cables
B. Joist must have bridging installed
C. Tag the load for weight
D. Inspect decking labels
, 4. When materials are being hoisted to an upper level, a tag line is used to:
A. Help control the load
B. Identify the load
C. Secure the load permanently
D. Measure load distance
5. Items such as field welding instructions, hangers, and connection details are
generally found on:
A. The detail drawings
B. The general notes
C. The title sheet
D. The structural schedule
6. The ability of a structural steel component to resist pulling forces is known as:
A. Compressive strength
B. Tensile strength
C. Yield strength
D. Shear strength
7. What type of decking has impressions formed on its rib?
A. Corrugated deck
B. Composite deck
C. Ribbed steel deck
D. Form deck
8. The ground floor elevation is +100.25. The rooftop elevation is +130.50. What is
the difference in elevation?
A. 29’9”
B. 30’3”
Conceptual Actual Frequently Tested Exam
Questions With Reviewed
100% Correct Detailed Answers
Guaranteed Pass!!Current Update!!
1. Assuming a grip distance of 1", what is the minimum length of the bolt required
for a 3/4" diameter bolt?
A. 2"
B. 2 1/4"
C. 1 3/4"
D. 2 1/2"
2. The location of bridging depends on the length of the:
A. Beam
B. Span
C. Column
D. Girder
3. Before bundles of deck can be landed on a bar joist, what action must be
completed?
A. Install safety cables
B. Joist must have bridging installed
C. Tag the load for weight
D. Inspect decking labels
, 4. When materials are being hoisted to an upper level, a tag line is used to:
A. Help control the load
B. Identify the load
C. Secure the load permanently
D. Measure load distance
5. Items such as field welding instructions, hangers, and connection details are
generally found on:
A. The detail drawings
B. The general notes
C. The title sheet
D. The structural schedule
6. The ability of a structural steel component to resist pulling forces is known as:
A. Compressive strength
B. Tensile strength
C. Yield strength
D. Shear strength
7. What type of decking has impressions formed on its rib?
A. Corrugated deck
B. Composite deck
C. Ribbed steel deck
D. Form deck
8. The ground floor elevation is +100.25. The rooftop elevation is +130.50. What is
the difference in elevation?
A. 29’9”
B. 30’3”
