Page |1
TTT1 Study guide Most Recent exam
COMPLETE (2025) EXAM Questions and
Answers (Verified Answers) (Latest
Update 2025) UPDATE!! Questions and
Correct Answers/ Latest Update / Already
Graded
Who is the third party group that approves and endorses standards?
Ans: American National Standards Institute
What term is used to describe the documents written by members, or
peers, in the industry?
Ans: Standards
A company's health, safety and environment policy should be a
combination of labor regulations and ?
Ans: Industry standards
Where OSHA has not promulgated specific standards, who is
responsible for following the acts general clause?
Ans: Employer
All rights reserved © 2025/ 2026 |
, Page |2
On a job site who should be involved in the JHA process?
Ans: The Whole Crew
What does the Term SOW stand for?
Ans: Scope Of Work
The letters JHA stand for what ?
Ans: Job Hazard Assessment
When using a extension ladder, how many feet past the platform must
it extend?
Ans: 3
If you have a sixteen foot ladder leaning against a building wall, how
many feet from the wall does the case need to by to have the correct
slope?
Ans: 4
Work boots with ankle support are recommended for all work sites?
All rights reserved © 2025/ 2026 |
, Page |3
Ans: True
What do the letters PPE stand for ?
Ans: Personal Protective Equipment
What does the ground fault circuit interrupter (GFCI) do?
Ans: Senses a short circuit, prevents electrocution , shuts off
the flow of electricity
Who is responsible for providing PPE?
Ans: Employer
When using a y-lanyard attached to your back d-ring, at what height
should the connection to your anchorage be placed?extend?
Ans: Shoulder level or above
What is the maximum distance between the sternal d-ring and the
fixed safety climb?
Ans: Nine inches
All rights reserved © 2025/ 2026 |
TTT1 Study guide Most Recent exam
COMPLETE (2025) EXAM Questions and
Answers (Verified Answers) (Latest
Update 2025) UPDATE!! Questions and
Correct Answers/ Latest Update / Already
Graded
Who is the third party group that approves and endorses standards?
Ans: American National Standards Institute
What term is used to describe the documents written by members, or
peers, in the industry?
Ans: Standards
A company's health, safety and environment policy should be a
combination of labor regulations and ?
Ans: Industry standards
Where OSHA has not promulgated specific standards, who is
responsible for following the acts general clause?
Ans: Employer
All rights reserved © 2025/ 2026 |
, Page |2
On a job site who should be involved in the JHA process?
Ans: The Whole Crew
What does the Term SOW stand for?
Ans: Scope Of Work
The letters JHA stand for what ?
Ans: Job Hazard Assessment
When using a extension ladder, how many feet past the platform must
it extend?
Ans: 3
If you have a sixteen foot ladder leaning against a building wall, how
many feet from the wall does the case need to by to have the correct
slope?
Ans: 4
Work boots with ankle support are recommended for all work sites?
All rights reserved © 2025/ 2026 |
, Page |3
Ans: True
What do the letters PPE stand for ?
Ans: Personal Protective Equipment
What does the ground fault circuit interrupter (GFCI) do?
Ans: Senses a short circuit, prevents electrocution , shuts off
the flow of electricity
Who is responsible for providing PPE?
Ans: Employer
When using a y-lanyard attached to your back d-ring, at what height
should the connection to your anchorage be placed?extend?
Ans: Shoulder level or above
What is the maximum distance between the sternal d-ring and the
fixed safety climb?
Ans: Nine inches
All rights reserved © 2025/ 2026 |
