NCC EFM EXAM PRACTICE QUESTIONS BANK
(470+) 2025/2026 ACCURATE QUESTIONS AND
CORRECT ANSWERS WITH RATIONALES || 100%
GUARANTEED PASS <LATEST VERSION>
NCC EFM — 100 Practice MCQs (Questions & Answers only)
Correct answer marked with . (No explanations as requested.)
1. Which document most commonly defines the minimum safety requirements for building
systems?
A) Operations Manual
B) Manufacturer Specs
C) Local Building Code
D) Vendor Agreement
2. What is the primary purpose of a facility preventive maintenance program?
A) Increase capital expenditures
B) React to failures only
C) Reduce downtime and extend asset life
D) Replace all equipment annually
,3. In an emergency, who has overall authority for on-site incident command until relieved?
A) Facility Manager
B) First responder from outside
C) Incident Commander (designated)
D) Shift Supervisor
4. Which HVAC control strategy saves the most energy in unoccupied hours?
A) Night setback/temperature set-back
B) Constant airflow at full speed
C) Increased ventilation rate
D) Manual window opening
5. The acronym "LEED" refers to:
A) Local Energy Efficiency Directive
B) Leadership in Energy and Environmental Design
C) Licensed Environmental Engineering Department
D) Light Emission and Efficiency Design
6. What is the acceptable frequency for testing portable fire extinguishers visually?
A) Monthly
B) Annually only
C) Weekly
D) Every 5 years
7. Which is the best metric to track facility space utilization?
A) Number of desks
, B) Occupancy rate (space used / total space)
C) Total floor area only
D) Number of employees
8. For electrical safety, the lockout/tagout procedure is intended to:
A) Prevent theft
B) Isolate energy sources during maintenance
C) Improve power quality
D) Increase equipment runtime
9. What does BMS stand for in building management?
A) Base Maintenance Schedule
B) Building Management System
C) Backup Main Supply
D) Boiler Monitoring Standard
10. Which fuel source typically has the highest carbon dioxide emissions per unit energy?
A) Natural gas
B) Coal
C) Solar
D) Wind
11. What is a critical component of an effective emergency evacuation plan?
A) Random exits only
B) Clear primary and secondary exit routes
(470+) 2025/2026 ACCURATE QUESTIONS AND
CORRECT ANSWERS WITH RATIONALES || 100%
GUARANTEED PASS <LATEST VERSION>
NCC EFM — 100 Practice MCQs (Questions & Answers only)
Correct answer marked with . (No explanations as requested.)
1. Which document most commonly defines the minimum safety requirements for building
systems?
A) Operations Manual
B) Manufacturer Specs
C) Local Building Code
D) Vendor Agreement
2. What is the primary purpose of a facility preventive maintenance program?
A) Increase capital expenditures
B) React to failures only
C) Reduce downtime and extend asset life
D) Replace all equipment annually
,3. In an emergency, who has overall authority for on-site incident command until relieved?
A) Facility Manager
B) First responder from outside
C) Incident Commander (designated)
D) Shift Supervisor
4. Which HVAC control strategy saves the most energy in unoccupied hours?
A) Night setback/temperature set-back
B) Constant airflow at full speed
C) Increased ventilation rate
D) Manual window opening
5. The acronym "LEED" refers to:
A) Local Energy Efficiency Directive
B) Leadership in Energy and Environmental Design
C) Licensed Environmental Engineering Department
D) Light Emission and Efficiency Design
6. What is the acceptable frequency for testing portable fire extinguishers visually?
A) Monthly
B) Annually only
C) Weekly
D) Every 5 years
7. Which is the best metric to track facility space utilization?
A) Number of desks
, B) Occupancy rate (space used / total space)
C) Total floor area only
D) Number of employees
8. For electrical safety, the lockout/tagout procedure is intended to:
A) Prevent theft
B) Isolate energy sources during maintenance
C) Improve power quality
D) Increase equipment runtime
9. What does BMS stand for in building management?
A) Base Maintenance Schedule
B) Building Management System
C) Backup Main Supply
D) Boiler Monitoring Standard
10. Which fuel source typically has the highest carbon dioxide emissions per unit energy?
A) Natural gas
B) Coal
C) Solar
D) Wind
11. What is a critical component of an effective emergency evacuation plan?
A) Random exits only
B) Clear primary and secondary exit routes
