9/23/25, 7:13 AM MSSC - Manufacturing Processes and Production Exam fully solved & updated 2025-2026(latest version verified for accuracy) Flas…
MSSC - Manufacturing Processes and Production
Exam fully solved & updated 2025-2026(latest
version verified for accuracy)
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Terms in this set (105)
The three common types wheels
of mechanisms are levers,
______, and inclined planes.
The metric system newtons
expresses force in ______.
A spring scale is used to force
measure ______.
https://quizlet.com/1080983359/mssc-manufacturing-processes-and-production-exam-fully-solved-updated-2025-2026latest-version-verified-for-accur… 1/11
, 9/23/25, 7:13 AM MSSC - Manufacturing Processes and Production Exam fully solved & updated 2025-2026(latest version verified for accuracy) Flas…
The English unit of pound-force (lb-f)
measure of weight is the
______.
The Law of Moments can both the force needed to balance OR force needed
be used to determine to move a load
______.
Torque can be calculated the force applied
by multiplying the
distance from the fulcrum
and ______.
A force that makes an torque
object rotate about a
point is called ______.
A second-class lever has load between the fulcrum and the effort arm
its ______.
A third-class lever has its effort arm between the fulcrum and the load
______.
A(n) ______ is produced rotational moment
when forces applied to a
lever cause it to rotate.
Mechanical advantage is the effort force applied
the ratio of the force
required to move a load
divided by _____.
The mechanical effort, resistance
advantage of a third-class
lever can be found by the
ratio of the length of the
______ arm divided by the
length of the ______ arm.
https://quizlet.com/1080983359/mssc-manufacturing-processes-and-production-exam-fully-solved-updated-2025-2026latest-version-verified-for-accur… 2/11
MSSC - Manufacturing Processes and Production
Exam fully solved & updated 2025-2026(latest
version verified for accuracy)
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Terms in this set (105)
The three common types wheels
of mechanisms are levers,
______, and inclined planes.
The metric system newtons
expresses force in ______.
A spring scale is used to force
measure ______.
https://quizlet.com/1080983359/mssc-manufacturing-processes-and-production-exam-fully-solved-updated-2025-2026latest-version-verified-for-accur… 1/11
, 9/23/25, 7:13 AM MSSC - Manufacturing Processes and Production Exam fully solved & updated 2025-2026(latest version verified for accuracy) Flas…
The English unit of pound-force (lb-f)
measure of weight is the
______.
The Law of Moments can both the force needed to balance OR force needed
be used to determine to move a load
______.
Torque can be calculated the force applied
by multiplying the
distance from the fulcrum
and ______.
A force that makes an torque
object rotate about a
point is called ______.
A second-class lever has load between the fulcrum and the effort arm
its ______.
A third-class lever has its effort arm between the fulcrum and the load
______.
A(n) ______ is produced rotational moment
when forces applied to a
lever cause it to rotate.
Mechanical advantage is the effort force applied
the ratio of the force
required to move a load
divided by _____.
The mechanical effort, resistance
advantage of a third-class
lever can be found by the
ratio of the length of the
______ arm divided by the
length of the ______ arm.
https://quizlet.com/1080983359/mssc-manufacturing-processes-and-production-exam-fully-solved-updated-2025-2026latest-version-verified-for-accur… 2/11
