Answers 2025\2026 latest.
Qs
The mission of the Occupational Safety and Health Administration (OSHA) is: - n
ANS✔
To send every worker home whole and healthy every day
Qs
Electricity travels in closed circuits, and its normal route is through a conductor.
Electric shock occurs when: - n
ANS✔
Your body becomes part of the circuit
Qs
Workers need to take which of the following common-sense steps to protect
themselves from falls through skylights and roof and floor openings? - n
ANS✔
-- Never sit on, lean against, or step on a skylight lens or any covering placed over a
hole in a roof or floor
-- Guard or securely cover all holes created or uncovered before leaving a work area
-- Always use a PFAS when working over an unguarded or uncovered opening more
than six feet above a lower level
Qs
The two steps for avoiding hazards that are always taken before the need for PPE is
considered are: - n
ANS✔
Workplace and engineering controls
Qs
,The three main scaffold types are aerial lifts, supported scaffolds and: - n
ANS✔
suspended scaffolds
Qs
Because using cranes or derricks to hoist personnel poses a serious risk to the
employees being lifted, any cranes and derricks that hoist personnel must: - n
ANS✔
-- Be placed on a firm foundation and be uniformly level within 1 percent of level
grade
-- Move the personnel platform slowly and cautiously and have rotation-resistant
rope with a safety factor of 10
-- Have all brakes and locking devices set when the occupied personnel platform is
in stationary position
Qs
If the use of a power tool can result in flying sparks, metal shavings, wood chips,
splashes, or other debris, workers should: - n
ANS✔
Protect themselves by wearing proper PPE
Qs
OSHA defines an excavation as: - n
ANS✔
Any man-made cavity, depression, trench or cut in the earth's surface formed by
earth removal
Qs
A training program to teach proper lifting techniques should cover: - n
ANS✔
-- Knowledge of the basic anatomy of the spine, muscles, and joints of the trunk
-- The use of safe lifting postures and timing
, Qs
Mechanical demolition refers to demolition using equipment like: - n
ANS✔
wrecking balls and jackhammers
Qs
OSHA's electrical standards are based on: - n
ANS✔
the NEC
Qs
What are the four main types of electrical injuries? - n
ANS✔
Electrocution, electric shock, burns, indirect (e.g., a fall from a ladder)
Qs
A shock's severity depends on: - n
ANS✔
-- Length of exposure to electricity
-- The amount of current and its frequency
-- The current's path
Qs
Electrical burns are the most serious of the three major types of burns, and most
often occur: - n
ANS✔
On the hands, from direct contact with current
Qs