1 | Page
MSSC QUALITY POST TEST QUESTIONS
AND ANSWERS
1. Inspection data requires for making effective manufacturing
decisions: - correct answer- Accurate data.
2. A feature of all mistake-proofing systems is: - correct answer-
Automated inspection.
3. A manufacturer has several options to handle nonconforming
materials. The option to use a nonconforming material is
acceptable: - correct answer- Only if it does not affect
performance or cause a safety hazard.
4. A process SOP should include clearly stated procedures for
dealing with nonconforming materials. If nonconformity is
detected and there are no written procedures, it is the
responsibility of the frontline worker to: - correct answer- C.
Refer the problem to a supervisor or responsible department.
5. Third-party audits provide evidence that a quality program
meets standards. A - correct answer- ...C. Acquire or maintain
certification.
, 2 | Page
6. An auditor bases his/her audit report on data collected by: -
correct answer- Directly observing the process.
Interviewing workers and supervisors.
Examining production records.
7. Inspections can be carried out for several purposes,
including as a part of continuous improvement. To perform
inspections, workers should know how to: - correct answer-
Read production documents.
Use inspection and analysis tools
Read safety and environmental standards.
8. A possible source of inaccuracy in inspection data is: -
correct answer- Human error.
9. Communication breakdowns can lead to inaccuracies and
poor decisions.
Detailed instructions for communicating results must be
included in every: - correct answer- Inspection plan.
10. The inspection frequency for any given process depends on
a number of factors.
MSSC QUALITY POST TEST QUESTIONS
AND ANSWERS
1. Inspection data requires for making effective manufacturing
decisions: - correct answer- Accurate data.
2. A feature of all mistake-proofing systems is: - correct answer-
Automated inspection.
3. A manufacturer has several options to handle nonconforming
materials. The option to use a nonconforming material is
acceptable: - correct answer- Only if it does not affect
performance or cause a safety hazard.
4. A process SOP should include clearly stated procedures for
dealing with nonconforming materials. If nonconformity is
detected and there are no written procedures, it is the
responsibility of the frontline worker to: - correct answer- C.
Refer the problem to a supervisor or responsible department.
5. Third-party audits provide evidence that a quality program
meets standards. A - correct answer- ...C. Acquire or maintain
certification.
, 2 | Page
6. An auditor bases his/her audit report on data collected by: -
correct answer- Directly observing the process.
Interviewing workers and supervisors.
Examining production records.
7. Inspections can be carried out for several purposes,
including as a part of continuous improvement. To perform
inspections, workers should know how to: - correct answer-
Read production documents.
Use inspection and analysis tools
Read safety and environmental standards.
8. A possible source of inaccuracy in inspection data is: -
correct answer- Human error.
9. Communication breakdowns can lead to inaccuracies and
poor decisions.
Detailed instructions for communicating results must be
included in every: - correct answer- Inspection plan.
10. The inspection frequency for any given process depends on
a number of factors.
