CSWA SIMULATION LATEST
Set the scale factor for plots ________ to avoid any misinterpretation of
the results, after performing a Static analysis with gap/contact elements.
- ANSWERS-Equal to 1
It is possible to mesh ________ with a combination of Solids, Shells and
Beam elements in SOLIDWORKS Simulation - ANSWERS-Parts and
Assemblies
SOLIDWORKS Simulation supports multi-body parts. Which of the
following is a true statement? - ANSWERS-1. You can classify a
different material for each Solid body
2. You can employ different mesh controls to each Solid body
3. You can classify Contact conditions between multiple Solid bodies
Which statement best describes a Compatible mesh? - ANSWERS-A
mesh where elements on touching bodies have overlaying nodes
The Ratio value in Mesh Control provides the geometric growth ratio
from one layer of elements to the next. - ANSWERS-True
END OF
PAGE
1
, CSWA SIMULATION LATEST
The structure displayed (I BEAM) in the following illustration is best
analyzed using: - ANSWERS-Beam Element
The structure displayed (truss) in the following illustration is best
analyzed using: - ANSWERS-Beam Element
The structure displayed (sheet metal part) in the following illustration is
best analyzed using: - ANSWERS-Shell Element
The structure displayed (thick circular part with many holes) in the
following illustration is best analyzed using: - ANSWERS-Solid
Element
Surface models can only be meshed with ________ elements. -
ANSWERS-Shell
You can simplify a large assembly in a Static Study by using the
________ or ________ options in your study. - ANSWERS-Make Rigid,
Fix
A force "F" applied in a static analysis produces a resultant displacement
URES. If the force is now 2xF and the mesh is unchanged, then URES
END OF
PAGE
2
Set the scale factor for plots ________ to avoid any misinterpretation of
the results, after performing a Static analysis with gap/contact elements.
- ANSWERS-Equal to 1
It is possible to mesh ________ with a combination of Solids, Shells and
Beam elements in SOLIDWORKS Simulation - ANSWERS-Parts and
Assemblies
SOLIDWORKS Simulation supports multi-body parts. Which of the
following is a true statement? - ANSWERS-1. You can classify a
different material for each Solid body
2. You can employ different mesh controls to each Solid body
3. You can classify Contact conditions between multiple Solid bodies
Which statement best describes a Compatible mesh? - ANSWERS-A
mesh where elements on touching bodies have overlaying nodes
The Ratio value in Mesh Control provides the geometric growth ratio
from one layer of elements to the next. - ANSWERS-True
END OF
PAGE
1
, CSWA SIMULATION LATEST
The structure displayed (I BEAM) in the following illustration is best
analyzed using: - ANSWERS-Beam Element
The structure displayed (truss) in the following illustration is best
analyzed using: - ANSWERS-Beam Element
The structure displayed (sheet metal part) in the following illustration is
best analyzed using: - ANSWERS-Shell Element
The structure displayed (thick circular part with many holes) in the
following illustration is best analyzed using: - ANSWERS-Solid
Element
Surface models can only be meshed with ________ elements. -
ANSWERS-Shell
You can simplify a large assembly in a Static Study by using the
________ or ________ options in your study. - ANSWERS-Make Rigid,
Fix
A force "F" applied in a static analysis produces a resultant displacement
URES. If the force is now 2xF and the mesh is unchanged, then URES
END OF
PAGE
2
