MSSC Maintenance awareness practice test / Strategies Review of Ke
MSSC Maintenance awareness practice test
Quizzes & Correct Answers.
Study online at https://quizlet.com/_9w70kq
1. A burn or pungent odor of oil indicates excessive temperature
2. A Chain should be replaced when its length becomes 3 percent
______longer than the original length.
3. A common sign of a misaligned coupling is excessive vibration
_____________.
4. A multimeter is a multipurpose devise that can mea- voltage, current, and resis-
sure tance
5. A power diagram is used in addition to a ladder dia- All of these (How the in-
gram to determine_________. put functions on the ma-
chine, The sequence of
operations, How the out-
put functions on the ma-
chine)
6. A power tool has the ground prong broken off of the Remove the power tool
plug on the power cord. What should be done? from service
7. A shaft coupling may be out of round if dial indicator any movement
shows _____________.
8. A sight glass in a reservoir usually indicates the ______ level
of fluid.
9. A tool should be sharpened When an unacceptable
surface finish is present
10. A viscos meter is a device used for measuring the 95%-99%
viscosity of an oil and is generally _______ accurate.
11.
, MSSC Maintenance awareness practice test
Study online at https://quizlet.com/_9w70kq
A well designed workstation places tools and equip- available with minimum
ment where they can be stress
12. A workstation should be designed to minimize mo- cause repetitive/ stress in-
tions that can juries
13. All documentation of preventive maintenance should in a designated, safe and
be kept secure location
14. An electrical diagram that arranges wires of a circuit ladder diagram
into order rows is called a(n) _____________.
15. An employee come to work on a rainy day and finds report the situation to the
water dripping on tools in their workstation. What supervisor
should the employee do first?
16. Because dial indicators are fairly delicate, they should be removed
_________ during adjustment of the motor position.
17. Before adjusting motor position during a shaft align- dial indicator
ment always make sure to remove the _____________.
18. Both analog and digital voltmeters measure Potential difference
19. Circuit testers determine if ______ electricity is present. AC
20. Daily maintenance involves daily records because Recurring events can be
analyzed to troubleshoot
problems Records indicate
how long a machine will
run without lubrication
21. Devises called ____________ often serve as the brains of relays
the automated machine.
MSSC Maintenance awareness practice test
Quizzes & Correct Answers.
Study online at https://quizlet.com/_9w70kq
1. A burn or pungent odor of oil indicates excessive temperature
2. A Chain should be replaced when its length becomes 3 percent
______longer than the original length.
3. A common sign of a misaligned coupling is excessive vibration
_____________.
4. A multimeter is a multipurpose devise that can mea- voltage, current, and resis-
sure tance
5. A power diagram is used in addition to a ladder dia- All of these (How the in-
gram to determine_________. put functions on the ma-
chine, The sequence of
operations, How the out-
put functions on the ma-
chine)
6. A power tool has the ground prong broken off of the Remove the power tool
plug on the power cord. What should be done? from service
7. A shaft coupling may be out of round if dial indicator any movement
shows _____________.
8. A sight glass in a reservoir usually indicates the ______ level
of fluid.
9. A tool should be sharpened When an unacceptable
surface finish is present
10. A viscos meter is a device used for measuring the 95%-99%
viscosity of an oil and is generally _______ accurate.
11.
, MSSC Maintenance awareness practice test
Study online at https://quizlet.com/_9w70kq
A well designed workstation places tools and equip- available with minimum
ment where they can be stress
12. A workstation should be designed to minimize mo- cause repetitive/ stress in-
tions that can juries
13. All documentation of preventive maintenance should in a designated, safe and
be kept secure location
14. An electrical diagram that arranges wires of a circuit ladder diagram
into order rows is called a(n) _____________.
15. An employee come to work on a rainy day and finds report the situation to the
water dripping on tools in their workstation. What supervisor
should the employee do first?
16. Because dial indicators are fairly delicate, they should be removed
_________ during adjustment of the motor position.
17. Before adjusting motor position during a shaft align- dial indicator
ment always make sure to remove the _____________.
18. Both analog and digital voltmeters measure Potential difference
19. Circuit testers determine if ______ electricity is present. AC
20. Daily maintenance involves daily records because Recurring events can be
analyzed to troubleshoot
problems Records indicate
how long a machine will
run without lubrication
21. Devises called ____________ often serve as the brains of relays
the automated machine.