Aerial Fire Apparatus CDC Verified Multiple Choice
and Conceptual Actual Exam Questions With
Reviewed 100% Correct Detailed Answers
Guaranteed Pass!!Current Update
1. Identify three objectives aerial apparatus, driver/operators should meet
when determining proper distance between the intended target and the
aerial apparatus - ANSWER Maximum stability, best climbing angle,
adequate extension.
2. Identify three hazards that cause an apparatus to be placed away from the
building - ANSWER Fire intensity, building instability, falling debris
3. Identify three problems aerial apparatus driver/operators may have when
responding to a Highway incident - ANSWER Lighting, water supply,
accessing the incident.
4. When stabilizing an apparatus on a bridge in poor condition, the
driver/operator should watch for - ANSWER Weak spots
5. One way to ensure safety a highway incident is to - ANSWER Position
the apparatus at an angle to act as a shield
6. Before entering the scene at a hazmat incident, driver/operators should -
ANSWER Wait until the nature of the hazard is understood
,7. Around a building that has been severely damaged by fire, the "collapse
zone" is: - ANSWER One and one-half times the height of the building
8. Identify the true statement about positioning aerial apparatus on or near a
railroad - ANSWER Vehicles should be kept at least 25 feet from the
tracks when possible.
9. When positioning at a hazmat incident, the aerial apparatus will most likely
be in the - ANSWER Cold zone
10.The major advantage of a reverse lay is that it - ANSWER Permits the
pumper to boost the hydrant pressure easily.
11.Relay apparatus may discharge air when a line is being charged with water
through - ANSWER bleeder valve
12.The major advantage of a forward lay is that - ANSWER It allows the
driver/operator to monitor the fire scene.
13.The design of any relay pumping operation is driven by the: - ANSWER
Desired flow at fire scene
14.When shutting down a constant pressure relay, it's important to - ANSWER
Start with attack apparatus and work backward to the source pumper
,15.Select the first step for creating a constant pressure relay - ANSWER
Station the largest capacity apparatus at the water source.
16.Driver/operator Weatherbee and his crew have finished working on a
structural fire and are preparing to return to the station. Weatherbee needs
to lower the aerial device into its bed - ANSWER Remove personnel
from the aerial ladder
17.Identify the THREE TRUE statements about safe operation of an aerial
device under conditions. - ANSWER - To help prevent ice formation on
aerial device, apply freeze to exposed sliding surfaces such as slip tubes or
rung rails
- Aerial device should NOT be operated in winds above 40 mph
- High pressure steam or non corrosive liquid de-icing agents similar to
those used on an aircraft can be used to remove ice from an aerial
device
18.When rescuing victims off a parapet-style roof, it may be necessary to -
ANSWER Rest the roof ladder against the aerial ladder
19.The " knee-sit" carry is best suited for - ANSWER Conscious, adult
victims who have trouble moving on their own
20.When performing a rescue with an aerial device, the stokes litter should be
used when removing - ANSWER Unconscious victims
, 21.The dangers outweigh the benefits for using aerial devices to perform
rescues from - ANSWER Parapet roof tops
22.An elevated master stream with two nozzle is ideal - ANSWER If there is
sufficient water flow and firefighters to support it
23.Blitz attack master streams should only flow until - ANSWER The fire is
controlled or knocked down
24.You're on scene of an accident where an overturned tanker is positioned
near a fuel that has ignited
The type of foam application most appropriate for this situation is the -
ANSWER Bank- down method
25.When performing a roof rescue with Ana aerial ladder, the top of the aerial
should be placed - ANSWER So that at least 6 feet (2 meters) extends
above the top edge of the roof
26.By attaching interior hand lines to the aerial device, it can be used on upper
floors of a building as - ANSWER An improvised standpipe
27.Stabilizers are required to prevent - ANSWER Apparatus from tipping as
the aerial device is extended
28.*says it's wrong but it's right - ANSWER Remove personnel from aerial
and Conceptual Actual Exam Questions With
Reviewed 100% Correct Detailed Answers
Guaranteed Pass!!Current Update
1. Identify three objectives aerial apparatus, driver/operators should meet
when determining proper distance between the intended target and the
aerial apparatus - ANSWER Maximum stability, best climbing angle,
adequate extension.
2. Identify three hazards that cause an apparatus to be placed away from the
building - ANSWER Fire intensity, building instability, falling debris
3. Identify three problems aerial apparatus driver/operators may have when
responding to a Highway incident - ANSWER Lighting, water supply,
accessing the incident.
4. When stabilizing an apparatus on a bridge in poor condition, the
driver/operator should watch for - ANSWER Weak spots
5. One way to ensure safety a highway incident is to - ANSWER Position
the apparatus at an angle to act as a shield
6. Before entering the scene at a hazmat incident, driver/operators should -
ANSWER Wait until the nature of the hazard is understood
,7. Around a building that has been severely damaged by fire, the "collapse
zone" is: - ANSWER One and one-half times the height of the building
8. Identify the true statement about positioning aerial apparatus on or near a
railroad - ANSWER Vehicles should be kept at least 25 feet from the
tracks when possible.
9. When positioning at a hazmat incident, the aerial apparatus will most likely
be in the - ANSWER Cold zone
10.The major advantage of a reverse lay is that it - ANSWER Permits the
pumper to boost the hydrant pressure easily.
11.Relay apparatus may discharge air when a line is being charged with water
through - ANSWER bleeder valve
12.The major advantage of a forward lay is that - ANSWER It allows the
driver/operator to monitor the fire scene.
13.The design of any relay pumping operation is driven by the: - ANSWER
Desired flow at fire scene
14.When shutting down a constant pressure relay, it's important to - ANSWER
Start with attack apparatus and work backward to the source pumper
,15.Select the first step for creating a constant pressure relay - ANSWER
Station the largest capacity apparatus at the water source.
16.Driver/operator Weatherbee and his crew have finished working on a
structural fire and are preparing to return to the station. Weatherbee needs
to lower the aerial device into its bed - ANSWER Remove personnel
from the aerial ladder
17.Identify the THREE TRUE statements about safe operation of an aerial
device under conditions. - ANSWER - To help prevent ice formation on
aerial device, apply freeze to exposed sliding surfaces such as slip tubes or
rung rails
- Aerial device should NOT be operated in winds above 40 mph
- High pressure steam or non corrosive liquid de-icing agents similar to
those used on an aircraft can be used to remove ice from an aerial
device
18.When rescuing victims off a parapet-style roof, it may be necessary to -
ANSWER Rest the roof ladder against the aerial ladder
19.The " knee-sit" carry is best suited for - ANSWER Conscious, adult
victims who have trouble moving on their own
20.When performing a rescue with an aerial device, the stokes litter should be
used when removing - ANSWER Unconscious victims
, 21.The dangers outweigh the benefits for using aerial devices to perform
rescues from - ANSWER Parapet roof tops
22.An elevated master stream with two nozzle is ideal - ANSWER If there is
sufficient water flow and firefighters to support it
23.Blitz attack master streams should only flow until - ANSWER The fire is
controlled or knocked down
24.You're on scene of an accident where an overturned tanker is positioned
near a fuel that has ignited
The type of foam application most appropriate for this situation is the -
ANSWER Bank- down method
25.When performing a roof rescue with Ana aerial ladder, the top of the aerial
should be placed - ANSWER So that at least 6 feet (2 meters) extends
above the top edge of the roof
26.By attaching interior hand lines to the aerial device, it can be used on upper
floors of a building as - ANSWER An improvised standpipe
27.Stabilizers are required to prevent - ANSWER Apparatus from tipping as
the aerial device is extended
28.*says it's wrong but it's right - ANSWER Remove personnel from aerial
