ASNT VT LEVEL II EXAM (ACTUAL
EXAM 2025) | ALL QUESTIONS AND
CORRECT ANSWERS | ALREADY
GRADED A+ | LATEST EXAM |
VERIFIED ANSWERS
Save
Terms in this set (103)
1. Per ASNT Section XI, NDE
personnel shall be recertified:
A. every 5 years by re-examination
B. B. every 3 years by retraining and
retesting
C. every 3 years based on
continuing satisfactory performance
D. annually by retraining
, 2. Per SNT-TC-1A, when an
employee leaves his employer:
A. his certification automatically
transfers to his new employer
B. B. his certification is automatically
terminated
C. he must take an examination to
be certified by the new company
D. he may not be certified by the
new employer for at least 3 months
3. Per SNT-TC-1A, certification of
NDE personnel is the responsibility
of the:
D.
A. ASME
B. manufacturer
C. NRC
D. employer
, 4. A variation or interpretation in the
normal physical structure or
configuration of a part is called a:
B.
A. Flaw
B. discontinuity
C. defect
D. fault
5. Indications caused by repeatd
loading, bending or by vibrating
stresses are called:
D.
A. mass hardness
B. lamellar testing
C. hot tears
D. fatigue cracks
, 6. A group of joining processes
which produces coalescence of
materials by heating them to a
suitable tempertaure and by using
filler metal having a liquidus below
450 degree C (840 degree F) and
B. below the solidus of the base metal
is called:
A. brazing
B. soldering
C. resistance welding
D. arc welding
7. SCC is a synergistic action of:
A. steel and cracks
B.
B. stress and corrosion
C. structure and coatings
D. slag and craters
8. Severe grinding cracks appear as:
A. wave-like patterns
C.
B. widely
C. lattice
D. deep crevices
EXAM 2025) | ALL QUESTIONS AND
CORRECT ANSWERS | ALREADY
GRADED A+ | LATEST EXAM |
VERIFIED ANSWERS
Save
Terms in this set (103)
1. Per ASNT Section XI, NDE
personnel shall be recertified:
A. every 5 years by re-examination
B. B. every 3 years by retraining and
retesting
C. every 3 years based on
continuing satisfactory performance
D. annually by retraining
, 2. Per SNT-TC-1A, when an
employee leaves his employer:
A. his certification automatically
transfers to his new employer
B. B. his certification is automatically
terminated
C. he must take an examination to
be certified by the new company
D. he may not be certified by the
new employer for at least 3 months
3. Per SNT-TC-1A, certification of
NDE personnel is the responsibility
of the:
D.
A. ASME
B. manufacturer
C. NRC
D. employer
, 4. A variation or interpretation in the
normal physical structure or
configuration of a part is called a:
B.
A. Flaw
B. discontinuity
C. defect
D. fault
5. Indications caused by repeatd
loading, bending or by vibrating
stresses are called:
D.
A. mass hardness
B. lamellar testing
C. hot tears
D. fatigue cracks
, 6. A group of joining processes
which produces coalescence of
materials by heating them to a
suitable tempertaure and by using
filler metal having a liquidus below
450 degree C (840 degree F) and
B. below the solidus of the base metal
is called:
A. brazing
B. soldering
C. resistance welding
D. arc welding
7. SCC is a synergistic action of:
A. steel and cracks
B.
B. stress and corrosion
C. structure and coatings
D. slag and craters
8. Severe grinding cracks appear as:
A. wave-like patterns
C.
B. widely
C. lattice
D. deep crevices
