NIMS CNC Mill Certification
A drill chuck fashion device holder can be used to hold smaller endmills (T/F) - ANS-False
Activates circular interpolation clockwise - ANS-G02
Activates circular interpolation counterclockwise - ANS-G03
Activates deep-hollow % drilling cycle - ANS-G83
Activates fast-percent drilling cycle - ANS-G73
Activates linear interpolation - ANS-G01
Activates single-bypass drilling - ANS-G81
Activates single-bypass drilling with dwell - ANS-G82
At this depth, percent drilling have to be used in place of unmarried pass drilling - ANS-three
instances the diameter of the drill bit
Attributes of a collet fashion tool holder - ANS-Provide minimal runout but also have minimum
conserving strength. Should now not be utilized in excessive torque operations.
Coolant off - ANS-M09
Coolant on - ANS-M08
Indicates end of canned cycle - ANS-G80
Indicates the Z coordinate that a device returns to after every operation in a canned cycle -
ANS-R-fee/R-plane
P-word fee that equals one second - ANS-P1000
Plunge Cutting - ANS-When a endmill is plunged directly into the fabric, much like a drill bit.
Sets the distance drilled in-among each p.C. Cycle - ANS-Q-word
Sets the live time for a single bypass drilling cycle with live - ANS-P-phrase
A drill chuck fashion device holder can be used to hold smaller endmills (T/F) - ANS-False
Activates circular interpolation clockwise - ANS-G02
Activates circular interpolation counterclockwise - ANS-G03
Activates deep-hollow % drilling cycle - ANS-G83
Activates fast-percent drilling cycle - ANS-G73
Activates linear interpolation - ANS-G01
Activates single-bypass drilling - ANS-G81
Activates single-bypass drilling with dwell - ANS-G82
At this depth, percent drilling have to be used in place of unmarried pass drilling - ANS-three
instances the diameter of the drill bit
Attributes of a collet fashion tool holder - ANS-Provide minimal runout but also have minimum
conserving strength. Should now not be utilized in excessive torque operations.
Coolant off - ANS-M09
Coolant on - ANS-M08
Indicates end of canned cycle - ANS-G80
Indicates the Z coordinate that a device returns to after every operation in a canned cycle -
ANS-R-fee/R-plane
P-word fee that equals one second - ANS-P1000
Plunge Cutting - ANS-When a endmill is plunged directly into the fabric, much like a drill bit.
Sets the distance drilled in-among each p.C. Cycle - ANS-Q-word
Sets the live time for a single bypass drilling cycle with live - ANS-P-phrase
