JLTV REAL EXAM/JLTV PRACTICE QUESTIONS AND ANSWERS 2025/2026|WELL
STRUCTURED|100% PASS
QUESTIONS ANSWERS
UTL
GENERAL PURPOSE
Fill in the blanks in the vehicle hierarchy
HEAVY
below:
CLOSE COMBAT
TRAILER
2. Why do the High Pressure Gas (HPG)
pumps automatically stop running after
running continuously for 10 minutes?
A. To prevent overcharging of the sus-
pension components and HPG Spring
C. To prevent the hydraulic pumps that
components
power the springs' pumps from overheat-
B. To prevent the SPNSN ERROR light
ing
from illuminating
C. To prevent the hydraulic pumps that
power the springs' pumps from overheat-
ing
D.To prevent system leakage
3. The transaxle receives power from the
A. Engine
B. Transmission Transmission
C. CTIS
D. Suspension system
Height for mudding stuff 30in, 60in
5. Air over hydraulic brakes function by:
A.The engine-driven belt provides power
to the hydraulic pumps for the brakes.
B. The air pressure for service brakes
is monitored by the CTIS, CTIS sends When the air system is charged, the
the signal to the hydraulic components of air pressure holds the hydraulic braking
when to apply or not apply. components open so they cannot ap-
C. The CAC controls the air circulation ply; when service brake applied, it drops
directly to the service brake, when the psi allowing hydraulic components to ap-
service brake is engaged it pushes hy- ply/engage.
draulic fluid through the lines to activate
the brakes.
When the air system is charged, the
air pressure holds the hydraulic braking
, JLTV REAL EXAM/JLTV PRACTICE QUESTIONS AND ANSWERS 2025/2026|WELL
STRUCTURED|100% PASS
QUESTIONS ANSWERS
components open so they cannot ap-
ply; when service brake applied, it drops
psi allowing hydraulic components to ap-
ply/engage.
Blackout Switch
Head Lights and Clearence Lights
Locate the buttons on the MUX panel Internal Dome Light Selector
Dome Light Dimmer
Dash Light Dimmer
7. List the five Suspension Settings the Answer: Operational, Loading, Tie Down,
DRIVER uses. Fording, and SAES
8. Combat Override is only to be used
in emergency situations, which of the
factors below are true for how Combat
Override affects the JLTV?
A. Provides for an emergency bypass in
the event of DSDU failure. All of the above
B. Disables neutral safety start
C. Bypasses all speed limitations pro-
tecting the drivetrain and CTIS settings
protecting the wheels
D. All of the above.
An emergency ingress tool, which is
9. What tool is shown below and what is
used to open the doors in the event of a
its purpose?
casualty or rollover
10. What do you do if an item in the Basic
Issue Items (BIl) appears to be broken or
unserviceable?
A. Try to fix it.
B. Annotate it on the BIl Inventory as
D. Annotate it on the BII Inventory and
serviceable.
call MT representative
C. Annotate it on the Bll Inventory as un-
serviceable and then continue with your
mission.
D. Annotate it on the BII Inventory and
call MT representative
STRUCTURED|100% PASS
QUESTIONS ANSWERS
UTL
GENERAL PURPOSE
Fill in the blanks in the vehicle hierarchy
HEAVY
below:
CLOSE COMBAT
TRAILER
2. Why do the High Pressure Gas (HPG)
pumps automatically stop running after
running continuously for 10 minutes?
A. To prevent overcharging of the sus-
pension components and HPG Spring
C. To prevent the hydraulic pumps that
components
power the springs' pumps from overheat-
B. To prevent the SPNSN ERROR light
ing
from illuminating
C. To prevent the hydraulic pumps that
power the springs' pumps from overheat-
ing
D.To prevent system leakage
3. The transaxle receives power from the
A. Engine
B. Transmission Transmission
C. CTIS
D. Suspension system
Height for mudding stuff 30in, 60in
5. Air over hydraulic brakes function by:
A.The engine-driven belt provides power
to the hydraulic pumps for the brakes.
B. The air pressure for service brakes
is monitored by the CTIS, CTIS sends When the air system is charged, the
the signal to the hydraulic components of air pressure holds the hydraulic braking
when to apply or not apply. components open so they cannot ap-
C. The CAC controls the air circulation ply; when service brake applied, it drops
directly to the service brake, when the psi allowing hydraulic components to ap-
service brake is engaged it pushes hy- ply/engage.
draulic fluid through the lines to activate
the brakes.
When the air system is charged, the
air pressure holds the hydraulic braking
, JLTV REAL EXAM/JLTV PRACTICE QUESTIONS AND ANSWERS 2025/2026|WELL
STRUCTURED|100% PASS
QUESTIONS ANSWERS
components open so they cannot ap-
ply; when service brake applied, it drops
psi allowing hydraulic components to ap-
ply/engage.
Blackout Switch
Head Lights and Clearence Lights
Locate the buttons on the MUX panel Internal Dome Light Selector
Dome Light Dimmer
Dash Light Dimmer
7. List the five Suspension Settings the Answer: Operational, Loading, Tie Down,
DRIVER uses. Fording, and SAES
8. Combat Override is only to be used
in emergency situations, which of the
factors below are true for how Combat
Override affects the JLTV?
A. Provides for an emergency bypass in
the event of DSDU failure. All of the above
B. Disables neutral safety start
C. Bypasses all speed limitations pro-
tecting the drivetrain and CTIS settings
protecting the wheels
D. All of the above.
An emergency ingress tool, which is
9. What tool is shown below and what is
used to open the doors in the event of a
its purpose?
casualty or rollover
10. What do you do if an item in the Basic
Issue Items (BIl) appears to be broken or
unserviceable?
A. Try to fix it.
B. Annotate it on the BIl Inventory as
D. Annotate it on the BII Inventory and
serviceable.
call MT representative
C. Annotate it on the Bll Inventory as un-
serviceable and then continue with your
mission.
D. Annotate it on the BII Inventory and
call MT representative
