PLASTIC PIPE AND FITTINGS / QUESTIONS AND ANSWERS (A+ GUIDE SOLUTION) NEWEST .

PLASTIC PIPE AND FITTINGS / QUESTIONS AND
ANSWERS (A+ GUIDE SOLUTION) NEWEST 2025-
2026.
Terms in this set (25)




An advantage of using requires little maintenance
plastic pipe in plumbing
installations is that plastic
_____.

A disadvantage of using emit toxic fumes
plastic pipe in plumbing
installations is that the
solvent chemicals used to
join the pipes _____.


polymers
Long chains of molecules
that manufacturers can
mold, cast, or force through
a die into desired plastic
shapes are called _____.

, A plumber heats a plastic thermoset
pipe, softens it, shapes it,
and then lets it cool. After it
is hardened, the plumber
realizes that the pipe needs
to be bent to a greater angle.
After reheating the pipe, the
plumber discovers that the
pipe will no longer soften.
The pipe material is most
likely _____.




Larger SDR numbers on a larger inside pipe and thinner pipe walls
plastic pipe indicate _____.

Most plumbing codes 40
designate the minimum size
of plastic pipe for use in or
under buildings as
Schedule
_____.

A type of plastic pipe that ABS
cannot be used for hot and
cold water distribution is
_____.


A disadvantage of PVC plastic is sensitive to sunlight
pipe is that it _____.

Water supply fittings are short radius with ledges
designed so they have a
_____.