4/21/25, 8:58 AM G-60, G60, F-60 FIRE GUARD, F-60 Study Material 2025 REAL EXAM QUESTIONS |MOST TESTED QUESTIONS AND CO…
G-60, G60, F-60 FIRE GUARD, F-60 Study
Material 2025 REAL EXAM QUESTIONS |MOST
TESTED QUESTIONS AND CORRECT ANSWERS
|100% ACCURATE|GET IT RIGHT!!
Save
Terms in this set (251)
Use of oxygen and flammable gasses, or LPG or
G-60
CNG for any hot work
COF exception Torch operations for jewelry
Storing using or handling
oxygen and flammable gas
FDNY permit
in excess of 400scf (LPG, CNG or scetylene)
oxidizing gass in excess of 504scf
Portable LPG must not 16.4 oz
be stored when the
capacity of the container
is greater than?
Portable CNG containers 8.7 SCF
must not be stored then
the capacity is greater
than?
Single standard portable 100LBs in weight
LPG containers must not
exceed?
https://quizlet.com/1033713265/g-60-g60-f-60-fire-guard-f-60-study-material-2025-real-exam-questions-most-tested-questions-and-correct-answ… 1/47
,4/21/25, 8:58 AM G-60, G60, F-60 FIRE GUARD, F-60 Study Material 2025 REAL EXAM QUESTIONS |MOST TESTED QUESTIONS AND CO…
Single CNG containers 381 SCF
must not exceed?
LPG 47 lbs
400 SCF is approximately
Site specific permits
Types of FDNY permits City wide permits
Transportation permits
Site specific permit can Can be permenant or temperary
be?
12 months only.
Permanent permits are
valid for how long? Permits and renewals require inspection and will
expire adter twelve months.
Temporary permits may One day to 12 months depending on the
be valid from? construction or operations needed.
30 days
City wise permit
duration?
Hazards out end of day
Quantity of hazardous 5 gals gasoline
material being 250 gals of flammable
stored(maximum)? 300 gals combustible liquid
Transportation permit FDNY approved inspected displayed on vehicle
Required for any project with hot work operation
Hot work authorization.
but not issued by the FDNY
Must be available for inspection by any
Responsible person representative of fire department during and 48
hours after the work is complete.
Cof holder who is trained in and responsible for
Fire guard
maintaijjng a fire watch.
https://quizlet.com/1033713265/g-60-g60-f-60-fire-guard-f-60-study-material-2025-real-exam-questions-most-tested-questions-and-correct-answ… 2/47
,4/21/25, 8:58 AM G-60, G60, F-60 FIRE GUARD, F-60 Study Material 2025 REAL EXAM QUESTIONS |MOST TESTED QUESTIONS AND CO…
Survailance of an area
Detect signs of early fire
Fire watch
Raise alarms
Notify department
Pre hot work check must Once per day
be conducted by the
responsible person
before hot work is
authorized at least?
Equipment working in order
Hot work is clear of combistibles and flammable
solids
Pre hot work check daily
and must very the
Combustible and non combustible are protected
following
Fire watch personel are assigned
Fire extinguisher available
A fire watch must be maintained during any hot
Fire watch
work operation.
The person conducting a Not have other duties
fire watch shall
Fire watch Minimum 2-A:20-B:C rating shall be accessible within
30ft from hot work
At least one portable fire
extinguisher with a
Fire watch 3-A 40-B:C
Exception roofing
operating fire
extinguisher
https://quizlet.com/1033713265/g-60-g60-f-60-fire-guard-f-60-study-material-2025-real-exam-questions-most-tested-questions-and-correct-answ… 3/47
, 4/21/25, 8:58 AM G-60, G60, F-60 FIRE GUARD, F-60 Study Material 2025 REAL EXAM QUESTIONS |MOST TESTED QUESTIONS AND CO…
Construction sites
Fire watch for torch
operations conducted at
Buildings and structures
following locations by a
F-60 fire guard:
Rooftops
Fire watch must continue 30 minutes after the conclusing of the work.
for
Time and record keeping First shall be conducted 30minute after completion
requirements
Second inspection 1 hour after completion
CNG or LPG torch
operations inspections
The inspection report 48 hours after work is complete for fire department
must be available representative to look over.
Oxygen cylinder is made Steel and contains 100% oxygen
of
Oxy propane degrees 1,500 degrees
Acetylene degrees 3000 degrees
Oxy-acetylene degrees 6000 degrees
Brazing and soldering Typically 840 degrees
temperatures
Oxy-fuel torch 2200 PSI (pounds per square inch)
Oxygen storage
pressures up to
Oxy-fuel torch Above 15 psi especially for acetylene
Dangerous fuel gas
pressures
Gas torches also have For burning weeds
applications and Melting ice
additions like Applying tar/asphalt
https://quizlet.com/1033713265/g-60-g60-f-60-fire-guard-f-60-study-material-2025-real-exam-questions-most-tested-questions-and-correct-answ… 4/47
G-60, G60, F-60 FIRE GUARD, F-60 Study
Material 2025 REAL EXAM QUESTIONS |MOST
TESTED QUESTIONS AND CORRECT ANSWERS
|100% ACCURATE|GET IT RIGHT!!
Save
Terms in this set (251)
Use of oxygen and flammable gasses, or LPG or
G-60
CNG for any hot work
COF exception Torch operations for jewelry
Storing using or handling
oxygen and flammable gas
FDNY permit
in excess of 400scf (LPG, CNG or scetylene)
oxidizing gass in excess of 504scf
Portable LPG must not 16.4 oz
be stored when the
capacity of the container
is greater than?
Portable CNG containers 8.7 SCF
must not be stored then
the capacity is greater
than?
Single standard portable 100LBs in weight
LPG containers must not
exceed?
https://quizlet.com/1033713265/g-60-g60-f-60-fire-guard-f-60-study-material-2025-real-exam-questions-most-tested-questions-and-correct-answ… 1/47
,4/21/25, 8:58 AM G-60, G60, F-60 FIRE GUARD, F-60 Study Material 2025 REAL EXAM QUESTIONS |MOST TESTED QUESTIONS AND CO…
Single CNG containers 381 SCF
must not exceed?
LPG 47 lbs
400 SCF is approximately
Site specific permits
Types of FDNY permits City wide permits
Transportation permits
Site specific permit can Can be permenant or temperary
be?
12 months only.
Permanent permits are
valid for how long? Permits and renewals require inspection and will
expire adter twelve months.
Temporary permits may One day to 12 months depending on the
be valid from? construction or operations needed.
30 days
City wise permit
duration?
Hazards out end of day
Quantity of hazardous 5 gals gasoline
material being 250 gals of flammable
stored(maximum)? 300 gals combustible liquid
Transportation permit FDNY approved inspected displayed on vehicle
Required for any project with hot work operation
Hot work authorization.
but not issued by the FDNY
Must be available for inspection by any
Responsible person representative of fire department during and 48
hours after the work is complete.
Cof holder who is trained in and responsible for
Fire guard
maintaijjng a fire watch.
https://quizlet.com/1033713265/g-60-g60-f-60-fire-guard-f-60-study-material-2025-real-exam-questions-most-tested-questions-and-correct-answ… 2/47
,4/21/25, 8:58 AM G-60, G60, F-60 FIRE GUARD, F-60 Study Material 2025 REAL EXAM QUESTIONS |MOST TESTED QUESTIONS AND CO…
Survailance of an area
Detect signs of early fire
Fire watch
Raise alarms
Notify department
Pre hot work check must Once per day
be conducted by the
responsible person
before hot work is
authorized at least?
Equipment working in order
Hot work is clear of combistibles and flammable
solids
Pre hot work check daily
and must very the
Combustible and non combustible are protected
following
Fire watch personel are assigned
Fire extinguisher available
A fire watch must be maintained during any hot
Fire watch
work operation.
The person conducting a Not have other duties
fire watch shall
Fire watch Minimum 2-A:20-B:C rating shall be accessible within
30ft from hot work
At least one portable fire
extinguisher with a
Fire watch 3-A 40-B:C
Exception roofing
operating fire
extinguisher
https://quizlet.com/1033713265/g-60-g60-f-60-fire-guard-f-60-study-material-2025-real-exam-questions-most-tested-questions-and-correct-answ… 3/47
, 4/21/25, 8:58 AM G-60, G60, F-60 FIRE GUARD, F-60 Study Material 2025 REAL EXAM QUESTIONS |MOST TESTED QUESTIONS AND CO…
Construction sites
Fire watch for torch
operations conducted at
Buildings and structures
following locations by a
F-60 fire guard:
Rooftops
Fire watch must continue 30 minutes after the conclusing of the work.
for
Time and record keeping First shall be conducted 30minute after completion
requirements
Second inspection 1 hour after completion
CNG or LPG torch
operations inspections
The inspection report 48 hours after work is complete for fire department
must be available representative to look over.
Oxygen cylinder is made Steel and contains 100% oxygen
of
Oxy propane degrees 1,500 degrees
Acetylene degrees 3000 degrees
Oxy-acetylene degrees 6000 degrees
Brazing and soldering Typically 840 degrees
temperatures
Oxy-fuel torch 2200 PSI (pounds per square inch)
Oxygen storage
pressures up to
Oxy-fuel torch Above 15 psi especially for acetylene
Dangerous fuel gas
pressures
Gas torches also have For burning weeds
applications and Melting ice
additions like Applying tar/asphalt
https://quizlet.com/1033713265/g-60-g60-f-60-fire-guard-f-60-study-material-2025-real-exam-questions-most-tested-questions-and-correct-answ… 4/47
