Sharp Monochrome Final Exam Questions with Correct Answers Graded A+
The MFPC/SCN-MPFC PWB interfaces with the following PWB(s) - Answers LSU PWB and LVDS PWB
What will happen if the LCC connection is disconnected while the tray is being lifted? - Answers The Lift
Motor is turned OFF to stop lifting the tray
What safety device is used to prevent overheating in the fusing unit? - Answers TS UM and TS US
Which PWB allows the MFP firmware to be updated? - Answers USB Connector PWB
Which is responsible for lifting the paper in the Paper Feed Tray for Feed Tray 2? - Answers C2LUM
Which sensor detects if the Fuser and Pressure Rollers are engaged or disengaged? - Answers HLPCD
What pattern will be used by setting SIM 64-12 item A to a 1 for the Print Image Distortion Manual Adj.
(LSU Parallelism)? - Answers GRID
The OPC drum surface is made up of which two components? - Answers CTL and CGL
The PCU PWB controls the following: Choose all that apply. - Answers Solenoids and Clutches
The Paper Feed Motor (CPFM) drives the waste toner section. - Answers True
When performing the Fusing Paper Guide Adjustment, what is the default for the Paper Guide? -
Answers One hash mark below the longest line.
Where does the Mirror Home Position Sensor get its power from? - Answers SCN MFP PWB
What adjustment must be made when the Resist Roller section has been disassembled? - Answers
Image Loss / Void Area Adjustment
A buckle is created in the document that will ensure that the document is squared against the
registration roller. - Answers True
The LED DRV PWB illuminates the document with light so the CCD PWB can read it. - Answers False
What is the purpose of the main charge screen grid? - Answers To evenly distribute and regulate the
charge voltage applied to the surface of the OPC drum
Which Simulation adjusts the Manual paper feed tray paper size width sensor? - Answers SIM 40-2
Which combination is correct for a Paper Tray Empty condition? - Answers C2PED (Paper Empty
Detector) is actuated ("high") and C2SPD is not actuated "low"
Which roller feeds the document to the Registration Roller? - Answers Paper Feed Roller
Which sensors are responsible for detecting document transportation in the Paper Feed section? -
Answers SPPD1 and SPPD2
The MFPC/SCN-MPFC PWB interfaces with the following PWB(s) - Answers LSU PWB and LVDS PWB
What will happen if the LCC connection is disconnected while the tray is being lifted? - Answers The Lift
Motor is turned OFF to stop lifting the tray
What safety device is used to prevent overheating in the fusing unit? - Answers TS UM and TS US
Which PWB allows the MFP firmware to be updated? - Answers USB Connector PWB
Which is responsible for lifting the paper in the Paper Feed Tray for Feed Tray 2? - Answers C2LUM
Which sensor detects if the Fuser and Pressure Rollers are engaged or disengaged? - Answers HLPCD
What pattern will be used by setting SIM 64-12 item A to a 1 for the Print Image Distortion Manual Adj.
(LSU Parallelism)? - Answers GRID
The OPC drum surface is made up of which two components? - Answers CTL and CGL
The PCU PWB controls the following: Choose all that apply. - Answers Solenoids and Clutches
The Paper Feed Motor (CPFM) drives the waste toner section. - Answers True
When performing the Fusing Paper Guide Adjustment, what is the default for the Paper Guide? -
Answers One hash mark below the longest line.
Where does the Mirror Home Position Sensor get its power from? - Answers SCN MFP PWB
What adjustment must be made when the Resist Roller section has been disassembled? - Answers
Image Loss / Void Area Adjustment
A buckle is created in the document that will ensure that the document is squared against the
registration roller. - Answers True
The LED DRV PWB illuminates the document with light so the CCD PWB can read it. - Answers False
What is the purpose of the main charge screen grid? - Answers To evenly distribute and regulate the
charge voltage applied to the surface of the OPC drum
Which Simulation adjusts the Manual paper feed tray paper size width sensor? - Answers SIM 40-2
Which combination is correct for a Paper Tray Empty condition? - Answers C2PED (Paper Empty
Detector) is actuated ("high") and C2SPD is not actuated "low"
Which roller feeds the document to the Registration Roller? - Answers Paper Feed Roller
Which sensors are responsible for detecting document transportation in the Paper Feed section? -
Answers SPPD1 and SPPD2
