NICET PRACTICE FIRE ALARM SYSTEMS LEVEL II (FIRE ALARM SYSTEMS II) COMPLETE EXAM REVIEW . QUESTIONS WITH CORRECT AND VERIFIED ANSWERS. GRADED A+.

NICET PRACTICE FIRE ALARM SYSTEMS LEVEL II (FIRE ALARM SYSTEMS II) COMPLETE EXAM REVIEW . QUESTIONS WITH CORRECT AND VERIFIED ANSWERS. GRADED A+. Which article of the NEC covers burglary system wiring? Select one: c.Article 760 d.None of the above - CORRECT ANSWER IS a.Article 725 Non-power-limited circuits operate with voltages up to ? . Select one: c.600 V d.750 V - CORRECT ANSWER IS c.600 V Tables ? and ? provide limitations for power-limited circuits. Select one: c.12A / 12B d.13A / 13B - CORRECT ANSWER IS c.12A / 12B Generally speaking, power-limited fire alarm circuits operate at ? . Select one: than 50 VA than 50 A than 100 VA than 100 VA - CORRECT ANSWER IS than 100 VA Power-limited wiring requirements are found in Part ? of Article 760. Select one: a.I b.II c.III d.IV - CORRECT ANSWER IS III Power-limited equipment circuit limitations are verified by ? . Select one: a.NFPA 72 installer manufacturer testing laboratory - CORRECT ANSWER IS testing laboratory Underground power-limited copper fire alarm circuits that extend outside the building must comply with ? . Select one: a.Parts II, III, and IV of Article 805 and Part I of Article 300 b.Parts II, III, and IV of Article 300 or Part I of Article 805 c.Parts II, III, and IV of Article 805 or Part I of Article 225 Fire alarm cables are permitted to be laid directly on top of suspended ceiling tiles. Select one: True False - CORRECT ANSWER IS False The inside of a conduit installed under a concrete slab at grade level is considered a ? location. - CORRECT ANSWER IS wet What cable type is suitable for two hours of direct attack by fire? Select one: a.FPL b.FPLP-CI c.MC d.NPLF - CORRECT ANSWER IS b.FPLP-CI Fire alarm circuit survivability is required for systems using ? . Select one: ete evacuation al evacuation or relocation a. and b. of the above - CORRECT ANSWER IS al evacuation or relocation Circuit integrity (CI) cable can be spliced with off-the-shelf twist-on connectors between the controls and the zone it serves. Select one: True False - CORRECT ANSWER IS False