IICRC WRT 2025 UPDATE EXAM 2 LATEST VERSIONS (VERSION
A & B) ACTUAL EXAM 1500 QUESTIONS AND CORRECT
DETAILED ANSWERS GRADED A+ | ASSURED SUCCESS !!
If at any time during the remediation of a cat 3 loss, any materially
interested party
disagrees with how the remediation processes will be performed,
restorers should
____________ immediately until the conflict is resolved. -
ANSWER -STOP
Drying equipment is only completely removed once materials
and environments
have been returned to their ________ -
ANSWER -dry goal
When moisture causes the edges of wood flooring to rise up higher
than the center
due to moisture absorption across the bottom of the board,
the planks are
____________ - ANSWER -cupping or
cupped
,After wood flooring has dried allow sufficient
_________________ time before
refinishing them. - ANSWER –
acclimation
When using an LGR dehu in a Class 3 water intrusion, containing
17,000ft cubed
the initial water removal recommended is -
ANSWER -425PPD
When using an LGR that removed 130 Pints per day at AHAm test
conditions, the recommended number of installed DEHUS
installed initially on a class 2 water loss with 35,000ft cubed is -
ANSWER -6
when using a desiccant dehu that is rated to process 400 CFM the
initial recommended number on a class 4 water loss in a 5,000 sq
ft building with 8 ft ceiling height is - ANSWER -5
a 12 ft x 14 ft room with 4 inches of water contains approx.
______ gallons of
water. - ANSWER -
418
, The number of gallons present in a water loss that is 3ft 9 inches
in depth in a 22 ft
x 30' basement is - ANSWER -
18,513
What is the dew point temp when the humidity ratio % is 132
GPP? - ANSWER -
75
degrees F
On a drying project, the indoor conditions are 80% F and 70%
RH. What temp is
needed to brin the RH to 35%? - ANSWER -102-103
degrees F
If indoor conditions are 75 degrees and 65% RH, condensation
begins to occur on
structural materials at what temp? - ANSWER -63
degrees (dew point)
At 55GPP and 75degrees F, the relative humidity is: - ANSWER -
40-42%
Which atmospheric conditions have the lowest vapor pressure, 80
degrees and 60
A & B) ACTUAL EXAM 1500 QUESTIONS AND CORRECT
DETAILED ANSWERS GRADED A+ | ASSURED SUCCESS !!
If at any time during the remediation of a cat 3 loss, any materially
interested party
disagrees with how the remediation processes will be performed,
restorers should
____________ immediately until the conflict is resolved. -
ANSWER -STOP
Drying equipment is only completely removed once materials
and environments
have been returned to their ________ -
ANSWER -dry goal
When moisture causes the edges of wood flooring to rise up higher
than the center
due to moisture absorption across the bottom of the board,
the planks are
____________ - ANSWER -cupping or
cupped
,After wood flooring has dried allow sufficient
_________________ time before
refinishing them. - ANSWER –
acclimation
When using an LGR dehu in a Class 3 water intrusion, containing
17,000ft cubed
the initial water removal recommended is -
ANSWER -425PPD
When using an LGR that removed 130 Pints per day at AHAm test
conditions, the recommended number of installed DEHUS
installed initially on a class 2 water loss with 35,000ft cubed is -
ANSWER -6
when using a desiccant dehu that is rated to process 400 CFM the
initial recommended number on a class 4 water loss in a 5,000 sq
ft building with 8 ft ceiling height is - ANSWER -5
a 12 ft x 14 ft room with 4 inches of water contains approx.
______ gallons of
water. - ANSWER -
418
, The number of gallons present in a water loss that is 3ft 9 inches
in depth in a 22 ft
x 30' basement is - ANSWER -
18,513
What is the dew point temp when the humidity ratio % is 132
GPP? - ANSWER -
75
degrees F
On a drying project, the indoor conditions are 80% F and 70%
RH. What temp is
needed to brin the RH to 35%? - ANSWER -102-103
degrees F
If indoor conditions are 75 degrees and 65% RH, condensation
begins to occur on
structural materials at what temp? - ANSWER -63
degrees (dew point)
At 55GPP and 75degrees F, the relative humidity is: - ANSWER -
40-42%
Which atmospheric conditions have the lowest vapor pressure, 80
degrees and 60
