Vehicle Communication Systems Exam
Questions and Answers 100% Solved
What vehicle architectures use an automatic process to transfer
ECU configuration? Select all that apply. - ✔✔PowerNet
TIPM
What vehicle architectures use a manual process in the scan tool
to program ECU PROXI configuration? Select all that apply. - ✔✔
What is the resistance of the terminating resistor on networks
equipped with one star connector? - ✔✔60 ohms (Normal CAN
Bus terminating resistance)
With the bus active and no faults present, what voltages should
be measured on CAN-C (-)? - ✔✔Not Approximately 4.8V
1.3-2.3V
Which of the following vehicles are equipped with the Atlantis
architecture? Select all that apply. - ✔✔Jeep renegade
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Jeep compass
Alfa Giulia
Alfa Stelvio
What Atlantis-High network uses splice block connectors? -
✔✔The WL Grand Cherokee
Only on the CAN-BH Bus
Atlantis-High found on? - ✔✔2021 Grand Cherokee(or WL)
(Automotive Ethernet standard 100BASE-TX){1500 bytes up to
100 mbps}<still use a twisted pair like CAN>
Can't be spliced or repaired like CAN Wires
Ideal for screen mirroring and streaming connected services
2022 Wagoneer(or WS)
With the bus active and no faults present, what voltages should
be measured on CAN-B (+)? - ✔✔0.39V-0.46V
Which diagnostic software and scan tool should be used to
diagnose legacy vehicle architectures? - ✔✔Hybrid of CAN with
early versions of serial-communication networks
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
Questions and Answers 100% Solved
What vehicle architectures use an automatic process to transfer
ECU configuration? Select all that apply. - ✔✔PowerNet
TIPM
What vehicle architectures use a manual process in the scan tool
to program ECU PROXI configuration? Select all that apply. - ✔✔
What is the resistance of the terminating resistor on networks
equipped with one star connector? - ✔✔60 ohms (Normal CAN
Bus terminating resistance)
With the bus active and no faults present, what voltages should
be measured on CAN-C (-)? - ✔✔Not Approximately 4.8V
1.3-2.3V
Which of the following vehicles are equipped with the Atlantis
architecture? Select all that apply. - ✔✔Jeep renegade
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Jeep compass
Alfa Giulia
Alfa Stelvio
What Atlantis-High network uses splice block connectors? -
✔✔The WL Grand Cherokee
Only on the CAN-BH Bus
Atlantis-High found on? - ✔✔2021 Grand Cherokee(or WL)
(Automotive Ethernet standard 100BASE-TX){1500 bytes up to
100 mbps}<still use a twisted pair like CAN>
Can't be spliced or repaired like CAN Wires
Ideal for screen mirroring and streaming connected services
2022 Wagoneer(or WS)
With the bus active and no faults present, what voltages should
be measured on CAN-B (+)? - ✔✔0.39V-0.46V
Which diagnostic software and scan tool should be used to
diagnose legacy vehicle architectures? - ✔✔Hybrid of CAN with
early versions of serial-communication networks
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
