NEIEP 100 elevator final exam Latest Update
2024-2025 Actual Exam from Credible Source
with 160 Questions and 100% Verified Detailed
Correct Answers Guaranteed
A construction crew arrives to work on Monday morning and finds the overhead
machine room floor is being poured. What precautions shoot be taken? - CORRECT
ANSWER: Avoid working in the hoistway
A construction team receives a job folder. What does it contain? - CORRECT ANSWER:
Wiring diagrams, final layout, and abstract
A mechanic hurts their back while lifting a heavy box. A doctor diagnoses a "strain".
What type of Injury did they sustain? - CORRECT ANSWER: Muscle stretched beyond
limits
A mechanic is about to lubricate a governor tension sheave in a traction elevator pit.
Before beginning work, what must be done? - CORRECT ANSWER: Lock out and tag
out
A mechanic is checking the condition of the belts on a hydraulic elevator. When is it safe
to check the tension? - CORRECT ANSWER: After locking out and tagging out the
mainline
A mechanic is taking a trouble call in a dumbwaiter, and realizes he must stand on the
car top, what should the dumbwaiter be equipped with? - CORRECT ANSWER: Car
safeties
A mechanic is working on a construction job, and finds the carpenter using a powder
activated tool to anchor wall track. Of the following, which precaution should the
mechanic take? - CORRECT ANSWER: Wear hearing protection
,A mechanic needs to ride on the car top, but a top-of car operating device is not
available. What should the mechanic do? - CORRECT ANSWER: Establish
communication with a qualified person in the car
A scaffold is required to be able to support its own weight and atleast _______ times the
maximum intended loan applied to transmitted to it. - CORRECT ANSWER: 4
According to the federal OSHA safety standard scaffolds that exceed _____ ft. In height
need to be designed by a precessional engineer. - CORRECT ANSWER: 125 feet
According to the federal OSHA safety standard what is the accepted height to base
width ratio (including outrigger supports, if used) after which the scaffold needs to be
restrained from tipping by buying, tying or bracing? - CORRECT ANSWER: 4:1
After locking out and tagging out the electrical system, what safety step must be taken
before entering an escalator truss? - CORRECT ANSWER: Install a mechanical lock
Along with spring buffers, limit switches, and cylinder head packing, what else would be
found in a conventional hydraulic elevator pit? - CORRECT ANSWER: Drip collection
pan or oil return system
An elevator constructor is asked to check on something in the pit. When must barriers
be installed? - CORRECT ANSWER: When hoistway door will be open more than 5"
Any scaffold or accessories that are damaged shall be ____ - CORRECT ANSWER:
Repaired and replaced
At which point on the lifeline should your lanyard be attached? - CORRECT ANSWER:
Above your shoulder
Before assembling scaffolding, the components should be inspected for - CORRECT
ANSWER: All answer choices are correct
, Before shortening a governor rope, what safety steps should be taken? - CORRECT
ANSWER: LOTO and support tension sheave
Door rollers can be held in place with through bolts. What other means of attachment
can accomplish this? - CORRECT ANSWER: Snap rings
Each suspended scaffold installation should hav me a/an ____ - CORRECT ANSWER:
Emergency plan
Elevator constructors should only use which type of drawings? - CORRECT ANSWER:
Final and approved
For purpose of dimensioning, what type of lines are used on installation drawings? -
CORRECT ANSWER: Extension lines
How are threads specified on metric bolts - CORRECT ANSWER: Pitch of the threads
How do you determine the correct angle from the vertical for placing a ladder? -
CORRECT ANSWER: Measure out a distance of 1/4 the height
How many means of breaking must a hoist have? - CORRECT ANSWER: 2
How many possible views are available from drawings using orthographic projections? -
CORRECT ANSWER: Six
How often must scaffolding be inspected before it can be used? - CORRECT ANSWER:
Before each work shift
How would a class 1 fit for a bot be described? - CORRECT ANSWER: Loose
2024-2025 Actual Exam from Credible Source
with 160 Questions and 100% Verified Detailed
Correct Answers Guaranteed
A construction crew arrives to work on Monday morning and finds the overhead
machine room floor is being poured. What precautions shoot be taken? - CORRECT
ANSWER: Avoid working in the hoistway
A construction team receives a job folder. What does it contain? - CORRECT ANSWER:
Wiring diagrams, final layout, and abstract
A mechanic hurts their back while lifting a heavy box. A doctor diagnoses a "strain".
What type of Injury did they sustain? - CORRECT ANSWER: Muscle stretched beyond
limits
A mechanic is about to lubricate a governor tension sheave in a traction elevator pit.
Before beginning work, what must be done? - CORRECT ANSWER: Lock out and tag
out
A mechanic is checking the condition of the belts on a hydraulic elevator. When is it safe
to check the tension? - CORRECT ANSWER: After locking out and tagging out the
mainline
A mechanic is taking a trouble call in a dumbwaiter, and realizes he must stand on the
car top, what should the dumbwaiter be equipped with? - CORRECT ANSWER: Car
safeties
A mechanic is working on a construction job, and finds the carpenter using a powder
activated tool to anchor wall track. Of the following, which precaution should the
mechanic take? - CORRECT ANSWER: Wear hearing protection
,A mechanic needs to ride on the car top, but a top-of car operating device is not
available. What should the mechanic do? - CORRECT ANSWER: Establish
communication with a qualified person in the car
A scaffold is required to be able to support its own weight and atleast _______ times the
maximum intended loan applied to transmitted to it. - CORRECT ANSWER: 4
According to the federal OSHA safety standard scaffolds that exceed _____ ft. In height
need to be designed by a precessional engineer. - CORRECT ANSWER: 125 feet
According to the federal OSHA safety standard what is the accepted height to base
width ratio (including outrigger supports, if used) after which the scaffold needs to be
restrained from tipping by buying, tying or bracing? - CORRECT ANSWER: 4:1
After locking out and tagging out the electrical system, what safety step must be taken
before entering an escalator truss? - CORRECT ANSWER: Install a mechanical lock
Along with spring buffers, limit switches, and cylinder head packing, what else would be
found in a conventional hydraulic elevator pit? - CORRECT ANSWER: Drip collection
pan or oil return system
An elevator constructor is asked to check on something in the pit. When must barriers
be installed? - CORRECT ANSWER: When hoistway door will be open more than 5"
Any scaffold or accessories that are damaged shall be ____ - CORRECT ANSWER:
Repaired and replaced
At which point on the lifeline should your lanyard be attached? - CORRECT ANSWER:
Above your shoulder
Before assembling scaffolding, the components should be inspected for - CORRECT
ANSWER: All answer choices are correct
, Before shortening a governor rope, what safety steps should be taken? - CORRECT
ANSWER: LOTO and support tension sheave
Door rollers can be held in place with through bolts. What other means of attachment
can accomplish this? - CORRECT ANSWER: Snap rings
Each suspended scaffold installation should hav me a/an ____ - CORRECT ANSWER:
Emergency plan
Elevator constructors should only use which type of drawings? - CORRECT ANSWER:
Final and approved
For purpose of dimensioning, what type of lines are used on installation drawings? -
CORRECT ANSWER: Extension lines
How are threads specified on metric bolts - CORRECT ANSWER: Pitch of the threads
How do you determine the correct angle from the vertical for placing a ladder? -
CORRECT ANSWER: Measure out a distance of 1/4 the height
How many means of breaking must a hoist have? - CORRECT ANSWER: 2
How many possible views are available from drawings using orthographic projections? -
CORRECT ANSWER: Six
How often must scaffolding be inspected before it can be used? - CORRECT ANSWER:
Before each work shift
How would a class 1 fit for a bot be described? - CORRECT ANSWER: Loose
