SSJE03WB - Towing a Jeep Vehicle Questions And Answers Rated A+ New Update Assured Satisfaction

When two wheels are raised, and two wheels are on the ground, this is called ___________________. - Dolly towing Engineers will often recommend ______________ as the best answer to towing questions, because it works well for all drivetrains. - platform or trailer towing For Jeep Cherokee with _______________, the ONLY acceptable method of towing is with ALL FOUR WHEELS OFF the ground. - Jeep Active Drive I with single-speed PTU Front-wheel drive Jeep Renegade and Jeep Compass can be towed using ________________. - dolly tow with front wheels off the ground Jeep Cherokee can be flat-towed when it is equipped with ____________________________. - Jeep Active Drive II Jeep Cherokee features standard front-wheel drive and ________ four-wheel-drive systems. - NOT1 NOT2 Jeep Grand Cherokee features standard rear-wheel drive and ____ available four-wheel drive systems. - 4 Jeep Grand Cherokee featuring _____________must be towed on a trailer or platform. - QuadraTrac I and Quadra-Trac Active On-Demand Jeep Grand Cherokee's available _____________four-wheel-drive systems both feature two-speed transfer cases with a NEUTRAL setting. - Quadra-Trac II and Quadra-Drive IIJeep Renegade and Jeep Compass feature standard front-wheel drive and ____ four-wheel-drive systems. - NOT 3 Jeep Renegade and Jeep Compass featuring Jeep Active Drive and Active Drive Low 4WD must be _______________________. - Ltowed on with all wheels off the ground Jeep Renegade and Jeep Compass offer the available ____ four-wheel-drive system. - Active Drive Proper recreational towing is important, because improper towing measures __________________. - can cause severe damage not covered under the Warranty The Auto Park Brake must be turned off by ______________. - finding the setting in the Programmable Uconnect features The key component that allows Jeep Cherokee to be flat-towed is the ______________________. - two-speed Power Transfer Unit featuring a NEUTRAL shift position The key factor determining how front-wheel-drive vehicles need to be towed is the fact that the _______________________________. - front driveshafts are always connected to the transaxle The key function of the Neutral setting for the Power Transfer Unit is _________________________________. - disengages the front and rear driveshafts Attaching a tow bar and allowing the vehicle to roll on four tires is known as which type of towing? - Flat towing The Towing Conditions chart that identifies the acceptable tow methods for each Jeep Brand vehicle is located in the ______________. - Owner's Manuals When the vehicle being towed is off the ground, this is called __________________________. - platform or trailer towingWhen towing a vehicle, engineers focus on eliminating the need for lubrication of the transmission and drivetrain of the towed vehicle as well as ________. - disconnecting the drivetrain components Which Jeep Wrangler 4WD system(s) is/are matched exclusively to an automatic transmission? - Selec-Trac Active On-Demand With the transfer case in NEUTRAL (N), what final steps are required before flat towing to prevent damage to an automatic transmission? - Turn engine OFF, and shift to PARK.