Final study guide for Mod 2 of BECC Exam

Final study guide for Mod 2 of BECC Exam The Engineering Log is a(n) _______ document maintained onboard for three years. - CORRECT ANSWERS-Legal On what type of ships do printouts of propulsion status parameters, auxiliary system parameters, and electrical plant parameters are maintained automatically. - CORRECT ANSWERS-gas turbine What do you do when a correction must be made in an engineering log? - CORRECT ANSWERS-A single line will be drawn through the original entry and the correction is initialed in the left margin. Who may make corrections, additions, or changes? - CORRECT ANSWERS-Person required to sign the log The bell book is a record of __________________ received by the throttleman regarding movement of the ship's propellers. - CORRECT ANSWERS-Signals, orders, and bells How long are operating logs maintained onboard? - CORRECT ANSWERS-Six months Who examines the logs and records daily? - CORRECT ANSWERS-Division Officer and Engineer Officer How must readings indicating abnormal operations be labelled? - CORRECT ANSWERS-Circle in red What word should be used when a whole station is secured or if the equipment is secured for several hours? - CORRECT ANSWERS-Secured At what position should the feedwater tank-sounding tubes be? - CORRECT ANSWERS-Locked shut All accesses to locked spaces must... - CORRECT ANSWERS-Be entered and checked at least hourly Who has the only keys to the key locker? - CORRECT ANSWERS-The Engineer Officer and Engineer Duty Officer Who maintains a continuous patrol above and below decks following a prescribed check-off sheet? - CORRECT ANSWERS-Sounding & Security Watch A hot bulkhead and blistering paint may indicated a _______ in the next compartment. - CORRECT ANSWERS-Fire You may relieve the watch fist and then try to figure out the condition of the plant later. - CORRECT ANSWERS-False Security violations are serious; report all physical violations to the ________. - CORRECT ANSWERS-Officer of the Deck The main propulsion and major auxiliary spaces, both in-port and underway, must ________________. - CORRECT ANSWERS-Be kept locked or continuously manned Who must approve removal of any inspection plate, fitting, or cover which permits access to the reduction gear casing? - CORRECT ANSWERS-Engineer Officer When is a ship in a cold iron status? - CORRECT ANSWERS-When it stops operating its propulsion plants and is receiving services from shore or other ships. Who can approve the resumption of normal operations? - CORRECT ANSWERS-The Engineer Officer, Command Duty Officer, or Commanding Officer. In cases of fire or flooding, what information should be stated? - CORRECT ANSWERS-What type of casualty you have witnessed, the location of the casualty, the compartment noun name, your name, your rate/rank, and telephone number. The fire watch stands by with a(n) ___________. - CORRECT ANSWERS-CO2 Extinguisher What provides safe, technically accurate, and standardized operational and casualty control procedures tailored to the individual ship's configuration? - CORRECT ANSWERS-Engineering Operational Sequencing System (EOSS) Where is the EOSS CD-ROM kept? - CORRECT ANSWERS-Engineering Log Room De-energize - CORRECT ANSWERS-The act of opening an electrical circuit breaker or switch at a power supply Energize - CORRECT ANSWERS-The act of closing an electrical circuit breaker or switch at a power suppl