• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 4 out of 781 pages
Exam (elaborations)

Solution Manual For Principles of Heat Transfer 8th Edition By Frank Kreith; Raj M. Manglik

Document preview thumbnail
Preview 4 out of 781 pages

Solution Manual For Principles of Heat Transfer 8th Edition By Frank Kreith; Raj M. Manglik

Content preview

Outline of Solutions Manual Objectives
Literature is strewn with the wreckage of men who have minded beyond reason the opinions of others.
V. Woolf

The structure of problem statements and problem solutions, the major instructional objectives for each chapter,
and a typical syllabus for a 15-week term, are given here. The syllabus can change to emphasize and de-emphasize
topics, per instructors discretion.


1 Problem Statement
The format used in the problem statement is as follows.

1.1 Problem Label
The problem label follows the format: Chapter Number.Problem Number.Purpose.Software. The purpose is cate-
gorized as follows.
(i) Familiarity (FAM) introduces the use of available relations.
(ii) Fundamental (FUN) gives further insights into the principles and requires combining some concepts and
relations.
(iii) Design (DES) uses the available relations and searches for an optimum engineering solution.
(iv) Solver option (S) indicates if the problem is intended for use with a solver.
For example, PROBLEM 3.5.DES.S indicates an end of chapter problem (as compared to EXAMPLE which
is a solved example problem). The problem is in Chapter 3; the problem number is 5; it is in the Design category;
and it is intended to be solved using a solver.

1.2 Problem Statement
The problem statement gives the following.
(i) The thermal problem considered and the knowns.
(ii) The questions and the unknowns.
(iii) Any hints on needed simplifications and assumptions for the analysis.

1.3 Sketch
The sketch provides the following.
(i) The heat transfer media.
(ii) The significant variables properly labeled.


2 Problem Solution
The format used for the problem solution is as follows.

2.1 Re-State Problem Statement (GIVEN)
Re-word and re-state the problem knowns, assumptions, and simplifications.

2.2 Re-Draw the Physical Problem (SKETCH)
Draw the sketch of the thermal problem considered. Show the direction of the heat (and when appropriate the
fluid) flow. Identify the mechanisms of heat transfer and mechanisms of energy conversion. Make any other
needed additions to the sketch.

i

,2.3 Re-State Questions (OBJECTIVE)
Write the objectives of the problem and state the questions asked and the unknowns.

2.4 Solve the Problem (SOLUTION)
The solution of the problem includes some or all of the following steps.
(i) Control Volume and Control Surface: Mark the appropriate bounding surfaces and define the control vol-
umes and control surfaces.
(ii) Thermal Circuit Diagram: Draw the thermal circuit diagram for the problem, when appropriate.
(iii) Energy Equation: Write the appropriate form of the energy equation.
(iv) Energy Conversion: Write the appropriate relations for each of the energy conversion mechanisms.
(v) Heat Transfer Rates and Thermal Resistances: Write the appropriate relations for the heat transfer rates
and the thermal resistances.
(vi) Numerical Values: Determine the thermophysical and thermochemical properties from the tables, graphs,
and relations. When using tables, make the needed, appropriate interpolations. Always check the units of each
parameter and variable.
(vii) Solver: When needed, solve algebraic or differental equations using a solver such as SOPHT.
(viii) Final Numerical Solutions: Determine the magnitude of the unknowns.

2.5 Make Additional Comments (COMMENT)
Examine the numerical values and compare them to what is avaliable or what is initially expected. State what
insights have been gained from the exercise.



3 Major Instructional Objectives
3.1 Chapter 1: Introduction and Preliminaries
(i) Mechanisms of Heat Transfer
(ii) Qualitative Heat Flux Vector Tracking
(iii) Qualitative Analysis of Energy Conservation Equation
(iv) Quantitative Analysis of Energy Conservation Equation


3.2 Chapter 2: Energy Equation
(i) Finite- and Differential-Length Energy Equation
(ii) Divergence of Heat Flux Vector
(iii) Energy Conversion Mechanisms (to and from Thermal Energy)
(iv) Chemical and Physical Bonds Energy Conversion
(v) Electromagnetic Energy Conversion
(vi) Mechanical Energy Conversion
(vii) Bounding-Surface Thermal Conditions


3.3 Chapter 3: Conduction
(i) Physics of Specific Heat Capacity
(ii) Physics of Thermal Conductivity
(iii) Thermal Conduction Resistance and Thermal Circuit Analysis
(iv) Conduction and Energy Conversion
(v) Thermoelectric Cooling
(vi) Multidimensional Conduction
(vii) Distributed Transient Conduction and Penetration Depth
(viii) Lumped-Capacitance Transient Conduction
(ix) Multinodal Systems and Finite-Small Volume Analysis
(x) Conduction and Solid-Liquid Phase Change
(xi) Thermal Expansion and Thermal Stress


ii

,3.4 Chapter 4: Radiation
(i) Surface Emission
(ii) View Factor for Diffuse Gray Enclosures
(iii) Enclosure Radiation for Diffuse Gray Surfaces
(iv) Two-Surface Enclosures
(v) Three-Surface Enclosures with One Surface Re-Radiating
(vi) Enclosures with Large Number of Surfaces
(vii) Prescribed Irradiation and Nongray Surfaces
(viii) Inclusion of Substrate

3.5 Chapter 5: Convection: Unbounded Fluid Streams
(i) Conduction-Convection Resistance and Péclet Number
(ii) Evaporation Cooling of Gaseous Streams
(iii) Combustion Heating of Gaseous Streams
(iv) Joule Heating of Gaseous Streams
(v) Gas-Stream Radiation Losses

3.6 Chapter 6: Convection: Semi-Bounded Fluid Streams
(i) Laminar Parallel Flow and Heat Transfer: Nusselt, Péclet, Reynolds, and Prandtl Numbers
(ii) Average Surface-Convection Resistance
(iii) Turbulent, Parallel Flow and Heat Transfer
(iv) Impinging Jets
(v) Thermobuoyant Flows
(vi) Liquid-Gas Phase Change
(vii) Nusselt Number and Heat Transfer for Other Geometries
(viii) Inclusion of Substrate
(ix) Surface-Convection Evaporation Cooling

3.7 Chapter 7: Convection: Bounded Fluid Streams
(i) Average Convection Resistance, N T U , and Effectiveness
(ii) Nusselt Number and Heat Transfer for Tubes
(iii) Nusselt Number and Heat Transfer for Other Geometries
(iv) Inclusion of Bounding Surface
(v) Heat Exchanger Analysis
(vi) Overall Thermal Resistance

3.8 Chapter 8: Heat Transfer and Thermal Systems
(i) Combined Mechanisms of Heat Transfer
(ii) Various Energy Conversion Mechanisms
(iii) Innovation Applications




iii

, 4 Typical Syllabus

WEEK SUBJECT READING PROBLEMS

1 Introduction: Control Volume and Surface, Heat Flux Vector and 1.1 - 1.9 1.1, 1.4, 1.6, 1.15, 1.18
Mechanisms of Heat Transfer, Conservation Equations
2 Energy Equation for Differential Volume, Integral Volume, and 2.1 - 2.2 2.1, 2.5, 2.7, 2.9, 2.11
Combined Integral- and Differential-Length Volume
3 Work and Energy Conversion: Mechanisms of Energy Conver- 2.3 - 2.6 2.14, 2.17, 2.18, 2.32,
sion, Bounding-Surface Thermal Conditions, Methodology for Heat 2.35
Transfer Analysis
4 Conduction: Specific Heat and Thermal Conductivity of Matter; 3.1 - 3.3 3.1, 3.3, 3.9, 3.12, 3.13
Steady-State Conduction: Conduction Thermal Resistance
5 Steady-State Conduction: Composites, Thermal Circuit Analysis, 3.3 3.15, 3.26, 3.27, 3.30,
Contact Resistance, Energy Conversion, Thermoelectric Cooling 3.32
6 Transient Conduction: Distributed Capacitance, Lumped Capaci- 3.4 - 3.7, 3.53, 3.55, 3.63, 3.67,
tance, Discretization of Medium into Small-Finite Volumes 3.10 3.70
7 Radiation: Surface Emission, Interaction of Irradiation and Sur- 4.1 - 4.3 4.1, 4.4, 4.8, 4.9
face, Thermal Radiometry, Review
EXAM I (Covering Energy Equation and Conduction)
8 Radiation: Gray-Diffuse-Opaque Surface Enclosures, View-Factor 4.4 - 4.7 4.10, 4.19, 4.24, 4.43,
and Grayness Radiation Resistances, Thermal Circuit Analysis, 4.49
Prescribed Irradiation and Nongray Surfaces, Inclusion of Sub-
strate
9 Convection (Unbounded Fluid Streams): Conduction-Convection 5.1 - 5.2, 5.1, 5.3, 5.5, 5.19, 5.20
Resistance, Péclet Number, Combustion Heating of Gaseous 5.4, 5.7
Streams
10 Surface Convection (Semi-Bounded Fluid Streams): Flow and 6.1 - 6.2 6.1, 6.2, 6.3, 6.4
Surface Characteristics, Laminar Parallel Flow over Semi-Infinite
Plate, Péclet, Prandtl, Reynolds, and Nusselt Numbers, Surface-
Convection Resistance
11 Convection (Semi-Bounded Fluid Streams): Turbulent Parallel 6.3 - 6.5 6.7, 6.9, 6.10, 6.14, 6.18
Flow, Perpendicular Flow, Thermobuoyant Flows
12 Convection (Semi-Bounded Fluid Streams): Liquid-Vapor Phase- 6.6 - 6.8, 6.19, 6.21, 6.25, 6.40,
Change, Nusselt Number Correlations for Other Geometries, In- 6.10 6.45
clusion of Substrate
13 Convection (Bounded Fluid Streams): Flow and Surface Charac- 7.1 - 7.2 7.1, 7.3, 7.4
teristics, Tube Flow and Heat Transfer, Average Convection Resis-
tance, Review
EXAM II (Covering Surface Radiation and Convection: Semi-
Bounded Fluid Streams)
14 Convection (Bounded Fluid Streams): Tube and Ducts, High Spe- 7.3 - 7.7 7.7, 7.12, 7.20, 7.25, 7.33
cific Surface Areas, Nusselt Number Correlations, Inclusion of
Bounding Surface, Heat Exchangers
15 Heat Transfer in Thermal Systems: Thermal Functions, Analysis, 8.1 - 8.3 8.1
and Examples
FINAL EXAM (Comprehensive)




iv

Document information

Uploaded on
October 7, 2026
Number of pages
781
Written in
2026/2027
Type
Exam (elaborations)
Contains
Questions & answers
$14.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
TestsBanks
4.0
(176)
Sold
1152
Followers
206
Items
2689
Last sold
7 hours ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions