BMW ASSOCIATE LEVEL ASE TEST EXAM | ACTUAL EXAM
QUESTIONS AND VERIFIED ANSWERS | NEWEST 2026/2027
UPDATE | GRADED A+ | 100% PASS.
According to MSDS warning symbols, the warning symbol with a skull
and cross bones shown represents - ✔✔✔ Correct Answer > Acute
toxicity
While performing a CPO inspection, a technician finds the car has an
aftermarket LED headlight installed. The technician should: - ✔✔✔
Correct Answer > Fail the CPO inspection or replace the Headlighits
What component is found in the Diagnostic Smoke Vapor Machine
(Vacutec). - ✔✔✔ Correct Answer > Pressure Regulator
What is the importance of having the engine at operating temperature
when performing an oil service?
Drains oil faster
Removes more contaminants
The repair instructions say to do it
All of the above - ✔✔✔ Correct Answer > All of the above
,All of the following are true concerning the Roundtable, EXCEPT :
There are 12 shows each year.
Each Roundtable has a bulletin describing the topics.
The Roundtable is accessed through AIR.
Each Roundtable has a quiz - ✔✔✔ Correct Answer > The Roundtable
is accessed through AIR.
The TeileClearing list is updated if needed on :
The last day of the month.
The 25th of each month.
The 1st day of the month.
The 1st day of each quarter - ✔✔✔ Correct Answer > The 1st day of
the month.
Technician A says that SIBs can be found in TIS under Service
Information.
Technician B says that SIBs can be found in TIS under Technical
Documentation.
Who is correct? - ✔✔✔ Correct Answer > A only
, In TMSi, what is the path to check the progress of your BMW Technical
Levels?
Which of the following is not a method of preventing hardware from
loosening? - ✔✔✔ Correct Answer > Flat Washer
Which of the following statements is true?
All aluminum fasteners are microencapsulated.
All steel fasteners are reusable.
A joining torque specification is the same as final torque specification.
Fasteners need to stretch to get the correct holding force. - ✔✔✔
Correct Answer > Fasteners need to stretch to get the correct holding
force.
Regarding broken bolt removal procedure.
Technician A states that using cutting oil can prolong the life of the drill
bit.
Technician B states that after center punching the broken bolt to be
removed, a starter bit should be used.
QUESTIONS AND VERIFIED ANSWERS | NEWEST 2026/2027
UPDATE | GRADED A+ | 100% PASS.
According to MSDS warning symbols, the warning symbol with a skull
and cross bones shown represents - ✔✔✔ Correct Answer > Acute
toxicity
While performing a CPO inspection, a technician finds the car has an
aftermarket LED headlight installed. The technician should: - ✔✔✔
Correct Answer > Fail the CPO inspection or replace the Headlighits
What component is found in the Diagnostic Smoke Vapor Machine
(Vacutec). - ✔✔✔ Correct Answer > Pressure Regulator
What is the importance of having the engine at operating temperature
when performing an oil service?
Drains oil faster
Removes more contaminants
The repair instructions say to do it
All of the above - ✔✔✔ Correct Answer > All of the above
,All of the following are true concerning the Roundtable, EXCEPT :
There are 12 shows each year.
Each Roundtable has a bulletin describing the topics.
The Roundtable is accessed through AIR.
Each Roundtable has a quiz - ✔✔✔ Correct Answer > The Roundtable
is accessed through AIR.
The TeileClearing list is updated if needed on :
The last day of the month.
The 25th of each month.
The 1st day of the month.
The 1st day of each quarter - ✔✔✔ Correct Answer > The 1st day of
the month.
Technician A says that SIBs can be found in TIS under Service
Information.
Technician B says that SIBs can be found in TIS under Technical
Documentation.
Who is correct? - ✔✔✔ Correct Answer > A only
, In TMSi, what is the path to check the progress of your BMW Technical
Levels?
Which of the following is not a method of preventing hardware from
loosening? - ✔✔✔ Correct Answer > Flat Washer
Which of the following statements is true?
All aluminum fasteners are microencapsulated.
All steel fasteners are reusable.
A joining torque specification is the same as final torque specification.
Fasteners need to stretch to get the correct holding force. - ✔✔✔
Correct Answer > Fasteners need to stretch to get the correct holding
force.
Regarding broken bolt removal procedure.
Technician A states that using cutting oil can prolong the life of the drill
bit.
Technician B states that after center punching the broken bolt to be
removed, a starter bit should be used.
