Air assault Phase 2 test FY 2025 EXAM
QUESTIONS COMPREHENSIVE questions
answered Plus Rationales, 2026 verified
graded A+ already passed
1. What is the maximum safe approach angle to a helicopter when facing the
rotor arc?
A. 45 degrees
B. 90 degrees
C. 30 degrees
D. 60 degrees
Answer: A
Rationale: Approaching at 45 degrees keeps you clear of the rotor blades and tail rotor.
2. The “Danger Area” around a helicopter includes:
A. The rotor blades and tail rotor arc
B. Only the tail rotor
C. Only the main rotor
D. Only the landing gear
Answer: A
Rationale: Both main and tail rotors are hazardous and require strict clearance.
3. When a helicopter is landing, you should approach from
A. The front or 45-degree angle
B. The rear
C. Directly under the rotor
D. Any direction is safe
,Answer: A
Rationale: Approaching from the front keeps you in the pilot’s view and away from the tail
rotor.
4. When loading personnel, the team leader should ensure:
A. All gear is secured and helmets are fastened
B. Everyone runs to the helicopter
C. Soldiers carry loose items
D. No safety checks are needed
Answer: A
Rationale: Safety checks prevent accidents from loose equipment and rotor wash.
5. The correct hand signal for “move forward” is:
A. Arms extended forward with palms down
B. Arms crossed
C. Waving hands up and down
D. Thumbs up
Answer: A
Rationale: Standard ground-to-air signals are required for clear communication.
SECTION 2 — SLING LOAD OPERATIONS
6. The primary purpose of sling load operations is to:
A. Transport cargo quickly to remote locations
B. Perform parachute jumps
C. Conduct underwater operations
D. Transport only personnel
Answer: A
Rationale: Sling load is used for rapid movement of cargo in austere environments.
, 7. The maximum load capacity for a 10,000 lb sling set is:
A. 10,000 lbs
B. 5,000 lbs
C. 15,000 lbs
D. 20,000 lbs
Answer: A
Rationale: The rated capacity is the maximum safe weight the sling set can carry.
8. The safest method for rigging a sling load is:
A. Following the aircraft-specific load chart and checklist
B. Guessing the weight
C. Using any available rope
D. Skipping inspection
Answer: A
Rationale: Proper rigging ensures safety and prevents load failure.
9. Which of the following is a critical pre-flight check for sling loads?
A. Inspecting all slings, hooks, and connectors
B. Ignoring the load
C. Only checking the cargo
D. Checking weather only
Answer: A
Rationale: Inspections prevent failures during flight.
10. The “static discharge wand” is used to:
A. Remove static electricity from the load
B. Measure load weight
C. Secure the load
D. Signal the pilot
QUESTIONS COMPREHENSIVE questions
answered Plus Rationales, 2026 verified
graded A+ already passed
1. What is the maximum safe approach angle to a helicopter when facing the
rotor arc?
A. 45 degrees
B. 90 degrees
C. 30 degrees
D. 60 degrees
Answer: A
Rationale: Approaching at 45 degrees keeps you clear of the rotor blades and tail rotor.
2. The “Danger Area” around a helicopter includes:
A. The rotor blades and tail rotor arc
B. Only the tail rotor
C. Only the main rotor
D. Only the landing gear
Answer: A
Rationale: Both main and tail rotors are hazardous and require strict clearance.
3. When a helicopter is landing, you should approach from
A. The front or 45-degree angle
B. The rear
C. Directly under the rotor
D. Any direction is safe
,Answer: A
Rationale: Approaching from the front keeps you in the pilot’s view and away from the tail
rotor.
4. When loading personnel, the team leader should ensure:
A. All gear is secured and helmets are fastened
B. Everyone runs to the helicopter
C. Soldiers carry loose items
D. No safety checks are needed
Answer: A
Rationale: Safety checks prevent accidents from loose equipment and rotor wash.
5. The correct hand signal for “move forward” is:
A. Arms extended forward with palms down
B. Arms crossed
C. Waving hands up and down
D. Thumbs up
Answer: A
Rationale: Standard ground-to-air signals are required for clear communication.
SECTION 2 — SLING LOAD OPERATIONS
6. The primary purpose of sling load operations is to:
A. Transport cargo quickly to remote locations
B. Perform parachute jumps
C. Conduct underwater operations
D. Transport only personnel
Answer: A
Rationale: Sling load is used for rapid movement of cargo in austere environments.
, 7. The maximum load capacity for a 10,000 lb sling set is:
A. 10,000 lbs
B. 5,000 lbs
C. 15,000 lbs
D. 20,000 lbs
Answer: A
Rationale: The rated capacity is the maximum safe weight the sling set can carry.
8. The safest method for rigging a sling load is:
A. Following the aircraft-specific load chart and checklist
B. Guessing the weight
C. Using any available rope
D. Skipping inspection
Answer: A
Rationale: Proper rigging ensures safety and prevents load failure.
9. Which of the following is a critical pre-flight check for sling loads?
A. Inspecting all slings, hooks, and connectors
B. Ignoring the load
C. Only checking the cargo
D. Checking weather only
Answer: A
Rationale: Inspections prevent failures during flight.
10. The “static discharge wand” is used to:
A. Remove static electricity from the load
B. Measure load weight
C. Secure the load
D. Signal the pilot
